User's Manual

ManualsBrandsSounding Audio Industrial ManualsElectronicsAM/FM/RBDS/WB/USB/AUX-IN/BT/Sirius XM Ready Heavy Duty Radio

JHD1635BT

iPod

OPERATION

This unit is equipped with an iPod ready function that will allow you to control your iPod (if

compatible) using the control panel buttons. The following iPod versions are supported:

 iPod Nano 5G, 6G, 7G

 iPod Classic

 iPhone 4, 4S, 5

 iPod Touch 3G, 4G, 5G

NOTE: Earlier model iPod’s are not supported because they do not implement the

required control protocol. Also, the iPod shuffle is not supported because it does not

utilize the 30-pin Apple iPod Connector. These unsupported iPod models may be

connected to the radio using one of the Auxiliary Inputs.

Accessing iPod Mode

Connect a supported iPod or iPhone to the front

panel USB (or Rear USB) connector. The iPod icon

illuminates in the bottom left corner of the LCD

whenever an iPod or iPhone is attached to the USB

connector. Music playback begins automatically. To

enter iPod mode from any other source, press the

MODE button (4) until “iPod” appears on the display.

If the user connects an iPod containing no songs, the

radio will display a message stating “No Songs” in

iPod mode.

Turning the iPod On/Off

The iPod power turns on automatically when it is connected to the front panel USB port, as long

as the vehicle ignition is turned on. You can turn the iPod off by disconnecting it or by turning the

ignition off. When the ignition is off, the iPod will pause and then enter sleep mode after 2

minutes. While the iPod is connected, the power cannot be turned on or off from the iPod itself.

Controlling Playback

Pausing Playback

During playback, press the MUTE/>|| button (22) to pause the iPod player. “Pause” will appear

on the LCD. Press MUTE/>|| again to resume playback.

Repeat Play

During playback, press the 1/RPT button (8) to repeat the current song. “RPT” will appear on the

LCD. Press 1/RPT again to stop repeat playback.

Random Play

During playback, press the 3/RDM button (5) to play all songs in the current category in random

order. Random play will begin once the current song has finished playing. “RDM” will appear on

the LCD. Press 3/RDM again to stop random playback.

Selecting Tracks

During playback, press the TUNE/SEEK |<< / >>| buttons (18, 19) to play the previous or next

track in the current category. Press the TUNE/SEEK |<< button once to play the song from the

start position or press TUNE/SEEK |<< twice to play the previous track. Pressing the

TUNE/SEEK |<< button during the first 2 seconds of a track will play the previous track.

After 2 seconds, this action returns to the beginning of the current track.

Press and hold the TUNE/SEEK |<< / >>| button to fast reverse/forward the song.

NOTE: If you press and hold the TUNE/SEEK |<< / >>| button to change the current song

to the previous/next song, you will exit fast reverse/forward mode.

Alternate Display Mode

Press the DISP/SCROLL button (12) to change the display information between single and

double line text display.

Playlist Search

Press the PTY/CAT/MENU button (2) to access Playlist selection mode. While in Category

mode, press the TUNE/SEEK |<< / >>| buttons to choose file search by Playlist, Artist, Album,

Genre, Song, Audiobook or Podcast. Press the INFO/ENTER button (16) to select the search

mode. Use the TUNE/SEEK |<< / >>| buttons to search the available files on the iPod.

Press the INFO/ENTER button to play the selected song or file.