User's Manual

JRV215N

connection of ILLUM wire).

3. To adjust display backlight intensity, touch the “Dimming Day” and “Dimming Night” level

settings.

4. After Day & Night dimming levels have been set; toggle between them by pressing and

holding the MENU (1) on the front panel. (Works ONLY if dimming control is off)

5. To adjust contrast and chrominance of the display, touch “Display settings” and use the

on-screen arrows to adjust the levels.

6. Swipe the on-screen button to turn ON/OFF standby clock display. When standby mode is

on, the LED indicator (4) will light up.

SYSTEM MENU

Press the MENU button (1) or touch the on-screen button (8) in the home menu to access

different modes.

Table 2: Settings menu

Options Function

General Touch to enter the General settings menu.

Time Touch to enter the Time settings menu.

Panel Touch to enter the Panel settings menu.

Audio Touch to enter the Audio settings menu.

Camera Touch to enter the Camera settings menu.

Weather Band Touch to enter the Weather Band settings menu.

General Sub-menu

The following general sub-menu options can be adjusted

Table 3: General sub-menu

Settings Options Function

Wallpaper -- Touch to select the wallpaper preferred.

FM region Europe Touch to select the FM region.

United States

DVD rating ADULT (default) Touch to set the parental control rating. Any content

rated above the set rating cannot be viewed.

NC-17

PG-R

PG13

KID SAFE

Factory reset Yes Touch “Yes” to reset to factory default.

Software

Version

-- Touch to display the current software version.

MCU/APP/MEPG/BT/BSP/SERVO