User's Manual

JRV215N

iPhone/iPod/USB OPERATION

This unit is equipped with an iPod® ready function that will allow you to control your iPod (if

compatible) using the control panel buttons. This unit is made for the following iPod models:

 iPod Nano 5G, 6G, 7G

 iPod Classic

 iPhone 4, 4S, 5, 5C, 5S

 iPod Touch 3G, 4G, 5G

NOTE: 1. iPod and iPhone playback only supports audio source, video and images are

not supported. 2. Make sure that your iPod has the latest apple firmware installed to

avoid any connectivity issue.

Accessing iPod Mode

iPod will play automatically when connected to the

unit. From the App Menu screen, press USB to

access the USB connected iPod. “iPod” will appear in

the upper left corner of the display.

Turning the iPod On/Off

The iPod power turns on automatically when the unit

is turned on if iPod is connected via the iPod USB

cable. Turn off the iPod by disconnecting it from the

cable or by turning the ignition off. When the ignition

is turned off, the iPod will pause and then enter sleep mode after 2 minutes.

NOTE: The iPod will continuously recharge when connected to the unit, as long as the

vehicle ignition is turned on.

Selecting a Playlist

1. When an iPod is playing, touch the button to display the playlists on the LCD.

2. Touch to change the playlist between Playlist / Artist / Album / Genres / Songs /

Composers.

3. Touch the on-screen arrows or slide to navigate the selected playlist.

4. Touch to select a file to play.

Controlling Playback

Selecting Songs

 Touch the or button to go to the next or previous file. The selected file number will

appear on the information bar at the top of the screen.

Pausing Playback

 Touch pause to suspend playback. Playback controls are disabled with paused.