User's Manual

JWM1A
8
BLUETOOTH OPERATION
The JWM1A includes built-in Bluetooth technology that allows you to connect this head unit to
Bluetooth-enabled devices for streaming audio playback.
About Bluetooth Technology
Bluetooth wireless technology is a short-range wireless radio protocol. Operating in the 2.4 GHz
range, it transmits audio and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters.
Pairing a Bluetooth Device
Before you begin, consult the owner’s manual for the Bluetooth device you want to pair with the
JWM1A.
1. Make sure the device you want to pair is on and ready to receive a signal from the JWM1A.
To begin pairing, press and hold the button (12). The unit will automatically attempt to
pair to available devices. When pairing with a smartphone, the JWM1A becomes
“discoverable” by your smartphone and can be paired using the phone menu.
2. When the Bluetooth device has completed its search, the mobile phone will display the
Bluetooth device name (JWM1A).
3. Select JWM1A.
4. Enter the pairing password (0000), if requested.
5. If successful, the unit will display “PAIR OK”.
After connecting successfully, you will be able to listen to audio from your Bluetooth enabled
device through the JWM1A.
Bluetooth Audio (A2DP)
The A2DP music is available for Bluetooth enabled phones when the phone is connected. To
access Bluetooth mode and play songs stored on your phone, press the button (12). While in
BT mode , the “BT AUDIO” is displayed on the LCD.
Selecting Tracks
During playback, press the tune up >>| (1) or tune down |<< (2) to play the previous or next track.
Pausing Playback
During playback, press the number button 1/|| to pause the BT AUDIO player. Press number
button 1/ || again to resume playback. If you change to another mode, the mobile phone audio
will pause. Press the button (12) to return to BT mode and resume mobile phone audio
playback.
NOTE: If a Bluetooth device is disconnected due to the power being turned off or if the
device is out of range, the unit will automatically search for the matching Bluetooth mobile
device when the power is restored.
Bluetooth Menu Options
1. Press the button (12) to enter menu adjustment mode.
2. With “Device” displayed, press the VOL +/- (11) buttons to select.
3. Press the VOL +/- buttons to view paired BT devices and press 6/ENTER button (13) to
select.
4. Once a device is selected, press the VOL +/- buttons to choose one of the following options:
connect/disconnect, lock/unlock or delete (delete displays only if the device is not
connected).
 LOCK/UNLOCK: The JWM1A can store up to 5 devices for BT connection. The
devices are stored in FIFO (First In First Out) order. To prevent a device from being
bumped from the list when more than 5 devices are used, you must lock the device. To
Lock/Unlock a device, press the 6/ENTER button.
 DISCONNECT: To disconnect a paired device, press the 6/ENTER button to
temporarily remove the BT link. The link can be re-established through your phone
menu by selecting the JWM1A for connection.
 DELETE: To delete a device from the list, press the 6/ENTER button.
5. Press the 6/ENTER button to enter.