User's Manual

MA300

 Bluetooth Pair (On/Off): Choose “INFO/ENTER” to automatically pair a device.

 Bluetooth (On/Off): Choose “Bluetooth On” or “Bluetooth Off”.

 Volume Preset (1/40 – 40/40): Select an automatic turn-on volume.

 Reset to Defaults <ENTER>: Return the EEPROM to factory default set up values. Press

the INFO/ENTER button (18) to select.

NOTE: BT Pair and BT Device menu options are only available while the Bluetooth feature

is ON and the radio is in Bluetooth Audio mode.

NOTE: A locked Bluetooth device will not be overwritten from the list.

Battery Alarm Operation

If Battery Alarm is set to “On”, an alarm will sound (8 beeps every 30 sec) when the voltage

drops to 10.5V (+/- 0.3V). A visual warning (Low Battery) will appear flashing (8 flashes every 30

sec) in the LCD display.

NOTE: “Off” is the default setting for Battery Alarm. If the audio is muted or the volume is

set to 0, the audible beep will not be heard.

Equalizer

Press the EQ/LOUD button (11) to turn on the equalization function and select between five

pre-defined bass and treble curves: User > Flat > Pop > Classical > Rock.

Loudness

Press and hold the EQ/LOUD button (11) to toggle true loudness on/off. When listening to music

at low volumes, this feature will boost the bass ranges to compensate for the characteristics of

human hearing.

Auxiliary Input

To access an auxiliary device:

1. Connect the portable audio player to the AUX IN cables routed from the rear of the radio.

2. Press the MODE button (4) to select Aux In mode.

3. Press MODE again to cancel Aux In mode and switch to the next mode.

Liquid Crystal Display (LCD)

The current frequency and activated functions are shown on the LCD panel (20).

NOTE: LCD panels may take longer to respond when subjected to cold temperatures for

an extended period of time. In addition, the visibility of the numbers on the LCD may

decrease slightly. The LCD display will return to normal when the temperature increases

to a normal range.

Quick Exit Hot Key

In the following modes and conditions, press the AS/PS button (15) < 3 seconds to quickly

exit the current operation without waiting for the system default time out:

 System menu operation

 Searching mode

 Audio menu operation