UM1A Installation and Operation Manual
UM1A CONTENTS Warnings and Compliance .................................................................................................. 1 Introduction ......................................................................................................................... 2 Safety Information ............................................................................................................... 3 Installation .........................................................................................
UM1A WARNINGS AND COMPLIANCE WARNING! To reduce the risk of fire of electric shock, do not expose this apparatus to rain or moisture. WARNING! The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus. FCC Notes WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
UM1A HARDWARE KIT CONTENTS INTRODUCTION Mounting Screws x 4 System Features Features of the Polk UM1A marine audio system include: x x x x x x x x x x x x x x x x x x Bolt x 2 Full Dot Matrix LCD AM/FM US/EURO Tuner with 30 Presents (12 AM, 18 FM) SiriusXM-Ready™ USB Playback of MP3 and WMA files (USB1 & USB2) iPod Ready (USB interface USB1 & USB2) Bluetooth (Supports A2DP & AVRCP) Weatherband Tuner with Alerts Mute Pre-set Equalizer – 5 settings (User, Flat, Pop, Classical, Rock) Electronic Bass, Mid
UM1A SAFETY INFORMATION When Boating Keep the volume level low enough to be aware of your surroundings. Protect from Water Do not submerge the product in water, as this can cause electric shorts, fire or other damage. Protect from the Elements Use the included cover to protect the wired commander from sunlight, dust, and water while not in use. Protect from High Temperatures Do not mount radio within close proximity of engine compartment.
UM1A Bracket Mount INSTALLATION Before You Begin Always disconnect the negative battery terminal Important Notes x x x x Before final installation, test the wiring connections to make sure the unit is connected properly and the system works. Consult with your nearest dealer if installation requires the drilling of holes or other modifications to your vessel. Install the unit where it does not interfere with operating the vessel and cannot injure passengers.
UM1A 3. Removing the Unit To remove the commander, remove bracket mount or remove trim ring and mounting screws, then slide wired commander out of the mounting hole. 4. Removing the Trim Ring (Screw Mount Only) 5. Before removing the mounting screws, remove the trim ring first. Using a small non-metallic panel removal tool, apply the flat edge of the tool to the trim ring top latch area (as shown). Pull forward and twist to disengage the latches.
UM1A WIRING PIN DESCRIPTION PIN DESCRIPTION 1 SPEAKER RR– 7 SWITCHED +12VDC 2 SPEAKER RR+ 8 GROUND 3 SPEAKER FL+ 9 ILL-DIM (RUNNING LIGHTS) 4 SPEAKER FL– 10 REMOTE TRIGGER 5 SPEAKER FR+ 11 SPEAKER RL+ 6 SPEAKER FR– 12 SPEAKER RL– PIN NO.
UM1A counter-clockwise to decrease. The unit will automatically exit the audio menu after 10 seconds of inactivity. The following menu items can be adjusted. BASIC OPERATION Bass Level Use the Encoder Knob to adjust the Bass level range from “-6” to “+6”. Mid-Level Use the Encoder Knob to adjust the Mid-level range from “-6” to “+6”. Treble Level Use the Encoder Knob to adjust the Treble level range from “-6” to “+6”.
UM1A 5. 6. Press the swoop arrow soft button to return to the previous operation.
UM1A PS Press the PS soft button to scan stations stored in the current band list. The unit will pause for ten seconds at each preset station. Press PS again to stop scanning when the desired station is reached. LIST Press the LIST soft button to display the preset list. There are 18 FM and 12 AM preset locations to store your favorite broadcast stations.
UM1A Stereo (ST) The unit will automatically pick up an FM stereo signal, when available. When in stereo mode, the “ST” icon appears in the display. When no stereo signal is available, the unit will automatically revert to mono operation, and no icon will be displayed.
UM1A WEATHER BAND OPERATION What is the NOAA Weather Radio/Weatheradio Canada? Weatherband Frequencies NOAA (National Oceanic and Atmospheric Administration) is a nationwide system that broadcasts local weather emergency information 24 hours a day via the National Weather Service (NWS) network. The U.S. network has more than 530 stations covering the 50 states as well as the adjacent coastal waters, Puerto Rico, the U.S. Virgin Islands and the U.S. Pacific Territories.
UM1A SiriusXM® RADIO OPERATION Channel Entry mode. 2. Rotate the Encoder Knob to select each digit. 3. Press the Encoder Knob button for each digit to enter “000”. 4. Upon entering the last digit, the unit will tune to the SiriusXM ID number for your tuner. 5. Write down the 8 digit ID number for reference. NOTE: The SiriusXM Radio ID does not include the letters I, O, S or F. Activating Your Service 1. With the radio still turned on, tune to the SiriusXM preview channel on Channel 1.
UM1A PS locking channels and the method to access locked channels is described below. Press the PS soft button to scan stations stored in the preset list. The unit will pause for ten Setting the User Passcode 1. Press and hold the MENU button for more than 3 seconds to enter the system menu. 2. Rotate the Encoder Knob to navigate the menu list to the "SXM SETUP MENU" option. 3. Press the Encoder Knob button to view "Set Lock Code". 4. Press the Encoder Knob button to select Set Lock Code.
UM1A 4. 5. 6. 7. With the unit turned off, press and hold the Power Button until the system version information is displayed on the screen. Press the Encoder Knob button to turn the LCD display off. Press the Power Button to turn on the unit. The lock code has now been reset to “0000”. INFO Alternate Display Information INFO option is available in TUNE, CAT and PSET LIST modes.
UM1A Advisory Messages Reported by the SiriusXM Vehicle Tuner On-Screen Display Advisory Message Cause Explanation/Solution Check Antenna Check Antenna The radio has detected a fault with the SiriusXM antenna. antenna cable is either disconnected or damaged. Check Tuner Check Tuner x x No Signal No Signal The The radio is having difficulty communicating with the SiriusXM Tuner. The tuner may be disconnected or damaged.
UM1A Advisory Messages Reported by the SiriusXM Vehicle Tuner (Continued) On-Screen Display Advisory Message Cause Explanation/Solution Chan Locked Channel Locked The channel that you have requested is Locked by the radio Parental Control feature. See the section on Parental Control, page 15 for more information on the Parental Control feature and how to access locked channels. Enter Code:_ _ _ _ Enter Lock Code User prompted to enter the lock/unlock code.
UM1A USB MP3 OPERATION Removing a USB Device Press the MODE button (7) to select another mode and then remove the USB device from the USB connector. NOTE: After loading a USB device, files and folders are accessed in the order in which they were written to the device. Therefore, the playing order may not be the same as the order in which they are expected to be played. Accessing USB Mode Switching to USB Mode Press the MODE button (7) twice to enter mode selection display.
UM1A To enter iPod mode from any other source, press the MODE button (7) and select the USB soft key. If the user connects an iPod containing no songs, the radio will display a message stating “No Songs” when it enters iPod mode. iPOD® OPERATION This unit is equipped with an iPod ready function that will allow you to control your iPod (if compatible) using the control panel buttons.
UM1A BLUETOOTH OPERATION The UM1A includes built-in Bluetooth technology that allows you to connect this head unit to Bluetooth-enabled devices for streaming audio playback. x About Bluetooth Technology x Bluetooth wireless technology is a short-range wireless radio protocol. Operating in the 2.4 GHz range, it transmits voice and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters. x x Disconnect or Delete for this device. You cannot delete a device that is actively connected.
UM1A BT Audio (A2DP) APP OPERATION When connected, a Bluetooth enabled device is able to stream audio to the UM1A. To access Bluetooth mode and play songs stored on your phone, press the MODE button (7). While in BT mode, the BT AUDIO icon illuminates on the LCD. Selecting Tracks During playback, press the |<< (2) / >>| (1) soft buttons to play the previous or next track. Pausing Playback During playback, press the f|| button (3) to pause the BT AUDIO player. “||” will appear on the LCD.
UM1A SPECIFICATIONS TROUBLESHOOTING FM Radio Frequency Coverage (USA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87.5 to 107.9 MHz Frequency Coverage (Europe) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87.5 to 108 MHz Sensitivity (S/N = 30dB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4uV Image Rejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
www.asaelectronics.com v.