Operation Manual

6
Product Specifications:
Bluetooth version : 2.1 + EDR
Speaker output : 2 x 3W
Unit size : 17.3” x 4.7” x 4.7”
Unit weight : 2.4 lb
Power supply : AC/DC adaptor (Input: AC 100-240V 50/60Hz 0.5A, Output: DC 5.8V 1.5A
centre positive)
Bluetooth range : 27 - 33 Feet
FM radio frequency : 87.5 – 108MHz
TROUBLESHOOTING
Problem Possible Cause Solution
No power AC/DC adapter plug not connected to
the wall outlet
Plug to the wall outlet.
No sound Volume in minimum position.
The connected device is not in play
mode.
Input source incorrect.
Press VOL + Button
to increase the
volume.
Play the music in the connected device
and make sure the volume level is in
high level.
Press the SOURCE button to set the
input source to the desired function.
Sound distortion Volume level too high Press VOL - Button to decrease the
volume.
FCC Instructions
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the product.
NOTE: This product has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This product generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If the product does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.