Operation Manual

ENGLISH
ENG 2
1. Volume Button
2. FM Antenna
3. Tuning Knob
4. Power indicator
5. Speaker
6. Earphone jack
7. AC adaptor jack
8. Battery Compartment
9. AM/FM/Po
wer Selector
10. Carrying Handle
Installing Batteries
1. Unscrew the compartment fixture with a tool, lift up the battery comp
artment cover
located on the rear of your Utility Radio
2. Insert 4 “C” size (UM-2) batteries into the compartment. Ensure that battery is
inserted in accordance with the diagram shown.
3. Close the battery cover and screw the compartment fixture.
4. Reduced power, distortion, shuttering sound or while low battery LED is lighted on
are all signs that batteries may need replacing.
5. If the radio is not to be used for any extended period of time, it is recommended that
the battery is removed from
the radio.
Power Supply By AC Adaptor
1. Connect the AC/DC adaptor to
the DC inlet of the unit.
2. Connect the AC/DC Adaptor to a properly installed wall socket.
Note: Whenever the adaptor is used, the batteries are automatically disconnected. To
operate the set on batteries, check that the AC plug is detached from the DC inlet of the
unit.
Note: Unplug the adaptor from the mains and the unit, when the unit is not used for a
longer period of time.
Operating your radio FM
1. Turn on your radio by switching
the Power knob to FM position.