Operation Manual

Normal Settings

4. VIDEO SETUP PAGE

There are four items in the VIDEO SETUP PAGE they are sharpness. Brightness, Contrast and logo. They are

used to set up the picture quality of the connected TV set or discs by pressing ok and

UP/DOWN/LEFT/RIGHT keys.

5. PREFERENCE SETUP

If there’s no disc in the disc tray, The disc tray is open or the disc in The disc tray is stopped, this item is

available. There are seven items In the PREFERENCE SETUP PAGE. They are TV Type, Audio, Subtitle,

Disc Menu, Parental, Password and Default.

(1). TV TYPE

This product supports both NTSC (National Television System Committee) and PAL (Phase Alternating

Line)

Television broadcasting standards and the default setting is PAL.

PAL: If the connected TV is Pal system, select this mode. It will change the video signal of a NTSC disc

and output in PAL format.

AUTO: The device will detect the systems auto matically when it connected to a TV.

NTSC: If the connected TV is NTSC system, select this mode. It will change the video signal of a PAL

disc and output in NTSC format.