Operation Manual

ManualsBrandsSoundmaster ManualsAudioC300ACRE

THIS INSTRUCTION BOOK MAY CONTAIN ERRORS AND OMISSIONS.

DESIGN AND SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.

ESTE MANUAL DE INSTRUCCIONES PUEDE CONTENER ERRORES Y OMISIONES.

EL DISEÑO Y LAS ESPECIFICACIONES ESTÁN SUJETOS A CAMBIO SIN PREVIO AVISO.

CE LIVRET D’INSTRUCTIONS PEUT CONTENIR DES ERREURS ET DES OMISSIONS

LE DESIGN ET LES CARACTÉRISTIQUES SONT SUJETS AUX CHANGEMENT SANS PRÉAVIS

Summary of content (6 pages)

PAGE 1
THIS INSTRUCTION BOOK MAY CONTAIN ERRORS AND OMISSIONS. DESIGN AND SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE. ESTE MANUAL DE INSTRUCCIONES PUEDE CONTENER ERRORES Y OMISIONES. EL DISEÑO Y LAS ESPECIFICACIONES ESTÁN SUJETOS A CAMBIO SIN PREVIO AVISO.
PAGE 2
RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PAGE 3
LOCATION OF CONTROLS 1. FM antenna 2. Radio Tuning knob 3. Voice and Radio Band switch, “Voice/AM/FM” 1 4. “Time Set” button 5. “Minute” button 6. “Hour” button 7. AC mains cord 8. Battery compartment 2 9. Speaker 3 4 10. Voice Selector 5 11. Volume knob 6 12 Function switch, “Off/On/Buzzer/Auto” 13. “Demo” button 14. “Demo Stop” button 15. “Alarm Set” button 16. “Snooze” button 7 8 9 10 11 12 13 14 15 16 17 LED display 17.
PAGE 4
POWER SOURCE MAIN POWER SUPPLY - Check that the power voltage as shown on the type plate corresponds to your local power voltage. If it does not, consult your dealer or service organization. - Connect the power cord to the wall outlet of AC power supply. As soon as you insert the power plug into the wall outlet, the display time will flash and show . (Assuming there is no battery for backup or battery is weak) Please see below how to set the correct time.
PAGE 5
OPERATION Voice and AM/FM Radio Normal Operation - Set the Function switch to “On” to turn on Voice or AM/FM Radio, corresponding to the setting of Voice and Radio Band switch to “Voice/AM/FM”. - When Radio is turned on, turn the “Radio Tuning knob” to select desired radio stations. - Turn the Volume knob to increase or decrease the sound level. - To improve the radio reception, it is recommended to extend the FM wire antenna and change its location for best reception.
PAGE 6
TROUBLESHOOTING GUIDE Check the following guide for the possible cause of a problem before contacting service. Symptom Cause Unit will not turn on AC cord not connected Function switch is not set correctly No sound from Volume control is set to speaker minimum No Radio or Voice Function switch is not set correctly Voice or Radio Band switch not set Alarm (Wake up) Alarm Time is not set.