Operation Manual

CD9170 / English manual
ENG 5
Program Play ( FOR CD )
1. In stop mode, press the PROG BUTTON to make program memory.
2. “
” will be displayed, “ 00” means track number to memory and “01” means program
number.
3. Press
or button to select the desired track.
4. Press the PROG BUTTON to enter the track into memory, the program numbers which will
be increment one step.
※ The program no. “01” has become “02” on the display.
5. Repeat step 3 and 4 until memory is full. ( 64 tracks )
6. Press
BUTTON to start the program play.
7. To stop the program play, press the STOP BUTTON.
8. For program play in step “ 7 ”, press the PROG BUTTON, then the
BUTTON.
9. To check the program memory, in program play mode, press the
or BUTTONS.
10. To erase the program memory, open the door or turn off the power.
Program Play ( FOR MP3 )
1. In stop mode, press the PROG BUTTON to make program memory.
2. “
” will be displayed, “ 000” means file number, “01” means program number.
3. Press the DIR UP/ASP BUTTON to select the desired directory, the display will become
“
”, “01” means directory number.
4. Press the
or BUTTONS to select the desired file.
5. Press the PROG BUTTON to enter the directory and file into memory. The program number
which will be increment one step.
※ The program no. “01” has become “02” on the display.
6. Repeat step 3 and 5 until memory is full. ( 64 files ).
7. Press
BUTTON to start the program play.
8. To stop the program play, press the STOP BUTTON.
9. For program play in step “ 8 ”, press the PROG BUTTON &
BUTTON.
10. To check the program memory, in program play mode, press the
or BUTTONS.
11. To erase the program memory, open the door or turn off the power.
※ If you do not need to select directory but only select files, the above step 3 can be
skipped.
Digital Anti- Shock Operation
The DIGITAL ANTI-SHOCK PROTECTION function uses semiconductor memory to prevent
the unit from skipping when the unit is subjected to shocks and vibration during play.
When the PLAY/PAUSE BUTTON is pressed and the power turns on, the “ASP” appears and
the Digital Anti-Shock Protection function turns on automatically.