Operation Manual

CD9180 / English manual
ENG 2
1. Open Battery Compartment cover.
2. Insert 2 batteries ( UM-3, “AA”, LR6 or equivalent ) in the correct polarity as indicated.
(Heavy duty batteries are recommended).
3. Close the cover properly.
*In order to operate the player on batteries, the optional AC/DC adaptor must be
disconnected from the DC 4.5V Jack.
AC—
——
—DC Adaptor
*Before connection, make sure the AC voltage of the adaptor correspond to your local AC
outlet voltage.
1. Plug the DC output of the adaptor to the DC 4.5V jack.
2. Connect the adaptor (4.5V/600mA with polarity ) to a power outlet.
RECHARGEABLE BATTERY OPERATION
This unit can fully recharge the specified rechargeable battery, in approximately 15 hours.
The rechargeable batteries (NOT supplied) should be recharged before they are used for the
first time because they are low in power or if they have not been used for a long period (over
60 days).
1. Open the battery compartment cover and insert two of the recommended
rechargeable batteries, matching polarity. (1.2V 650mA).
(Both batteries must be of rechargeable nickel-cadmium type, otherwise the
batteries may explode or leak.)
2. Plug in the AC adaptor and set the Recharge switch to ON position to start charging.
(Use only the AC adaptor supplied with the set for charging.)
3. After 15 hours. Please unplug the AC adaptor and switch the Recharge switch to the
off
position.
(Do not charge continuously for 24 hours or more. Doing so can cause the
performance of the rechargeable battery to deteriorate.)
Note : • You may play DISCS whilst charging the batteries.
4. If the operating time decreases drastically even when the rechargeable
nickel-cadmium
batteries are properly recharge, purchase a new set of rechargeable nickel-cadmium
batteries.
5. When charging for the first time or after a long time, playing time may be reduced. In
this case, charge and discharge the batteries several times.