Manualshelf

Operation Manual

ManualsBrandsSOUNDMASTER ManualsAudioPortable CD player CD, CD-R, CD-RW, MP3 Silver, White
123456
CD9180 / English manual
ENG 5
B. Intro Scan
During Play Mode
· Press the MODE BUTTON four times.
· The INT indicator will appear in the display.
· Press the PLAY BUTTON to play the first 10 seconds of each track on the disc.
NOTE –
––
– To cancel INTRO SCAN, simply press the MODE BUTTON until the INT indicator
disappears.
C. Random Play
During Play Mode
· Press the MODE BUTTON five times.
· The SHUF indicator will appear in the display.
· Press the PLAY BUTTON, all the files on a disc to be played in a random sequence and
after all files are played, system will stop automatically.
NOTE –
––
– To cancel RANDOM PLAY, simply press the MODE BUTTON until the SHUF
indicator disappears.
Program Play ( FOR CD )
1. In stop mode, press the PROG BUTTON to make program memory.
2. “ ” will be displayed, “ 00” means track number to memory and “01” means program
number.
3. Press or button to select the desired track.
4. Press the PROG BUTTON to enter the track into memory, the program numbers which will
be increment one step.
※ The program no. “01” has become “02” on the display.
5. Repeat step 3 and 4 until memory is full. ( 64 tracks )
6. Press BUTTON to start the program play.
7. To stop the program play, press the STOP BUTTON.
8. For program play in step “ 7 ”, press the PROG BUTTON, then the BUTTON.
9. To check the program memory, in program play mode, press the or BUTTONS.
10. To erase the program memory, open the door or turn off the power.
Program Play ( FOR MP3 )
1. In stop mode, press the PROG BUTTON to make program memory.
2. “ ” will be displayed, “ 000” means file number, “01” means program number.
3. Press the DIR UP/ASP BUTTON to select the desired directory, the display will become
“ ”, “01” means directory number.
4. Press the or BUTTONS to select the desired file.
5. Press the PROG BUTTON to enter the directory and file into memory. The program number
which will be increment one step.
※ The program no. “01” has become “02” on the display.
6. Repeat step 3 and 5 until memory is full. ( 64 files ).