Operation Manual

CD9180 / English manual
ENG 6
7. Press BUTTON to start the program play.
8. To stop the program play, press the STOP BUTTON.
9. For program play in step “ 8 ”, press the PROG BUTTON & BUTTON.
10. To check the program memory, in program play mode, press the or BUTTONS.
11. To erase the program memory, open the door or turn off the power.
※ If you do not need to select directory but only select files, the above step 3 can be
skipped.
Digital Anti- Shock Operation
The DIGITAL ANTI-SHOCK PROTECTION function uses semiconductor memory to prevent
the unit from skipping when the unit is subjected to shocks and vibration during play.
When the PLAY/PAUSE BUTTON is pressed and the power turns on, the “ASP” appears and
the Digital Anti-Shock Protection function turns on automatically.
LOW BATTERY ALERT
When the low battery indicator appears on the display, please prepare to replace the new
batteries.
Switch off the volume restriction
To protect your hearing, after switching on the device, only reduced volume is available. You
can switch off this “Volume restriction”.
1 »EQ« press and hold.– Display: »HIGH« flashes for 5 seconds.
2 Press again the »EQ« button to switch off the volume restriction.
3 Switch off the “Volume restriction” with »EQ«.
Note: ■ The volume restriction is reactivated after switching off or changing the disk.
SPECIFICATIONS
Output Power : ≥ 15 mW ( 32 Ω )
Freq. Response : 100 ~ 20000 Hz
Power Source : 2×UM-3”AA” LR6 size batteries ( batteries not included )
4.5v(600mA) AC-DC adaptor
Dimensions : 141mm(W) × 140mm(D) ×26mm(H)
** For improvement purposes, specification and design are subject to change without notice. **