User manual

CD9220 / English Instruction Manual

PAUSE

1. Press to interrupt playback. - The elapsed playing time blinks.

2. To resume playback, press to again

Note: The set will return to the stop mode automatically after 110 seconds in pause mode.

SELECTING ALBUMS AND TRACKS ON MP3-WMA-CD

Selecting a track during playback

Briefly press or once or several times to skip to beginning of the

current, previous or subsequent track.

- Playback continues with the selected track.

Searching for a passage during playback

1. Keep or pressed to find a particular passage in a backward or forward

direction.

Searching is started and playback continues at a low volume.

2. Release the button at the desired passage.

 Normal playback continues.

Selecting Album (only in MP3 mode)

Press the ALBUM▲ button to select the next album (if available).

PROGRAMMING TRACK NUMBERS

You can store up to 20 tracks in a program. A single

track may be store more than once in the program.

1. While playback is stopped

2. Press PROG to enter programming.

PROG indicator and track number briefly on display.

3. Select a track with or then press PROG to store the track.

4. Repeat step 2-3 to store all desired tracks

5. Press to start playback of your programmed tracks.

- PROG is shown and playback starts.

• To add additional tracks to your program, press to stop playback and continue

with step 2 and 3.

In the stop mode, you can review the programed track(s) by pressing or .

The display shows all the stored tracks in sequence.

Note:

If you try to store more than 20 tracks, start the program form the already first stored

title.

Clearing the program

While playback is stopped, press to clear program.

- PROG indicator goes off and the program is cleared.

Note: The program will also be cleared if the power supply is interrupted, or if the CD-

player lid is opened, or if the set switches off automatically.