User Manual

CD9290 / English Instruction Manual
3
Anti-Shock Function
The player has an Anti-Shock function. The function is automatically switched on when MP3 is
used. For audio CD playback, press the “ASP / PRE” button. “ASP" appears in the display. To
deactivate the anti-shock function, press the “ASP / PRE” key again.
CD
1. Insert the headphone plug to the “PHONE JACK”.
2. Slide the “OPEN” knob to the right side and the CD door opens. Put a disc into the CD
compartment with the label side upward and close the CD door.
3. The player now reads the CD, which may take a few seconds.
General Operation
PLAY/PAUSE button
▪ Press once to start the playback.
▪ Press once again to interrupt the playback.
STOP button
▪ Press once to stop the playback.
▪ Press the button once again to turn off the player.
SKIP button
▪ Press the button to skip to the next track or to the
previous track .
▪ Press and hold the button to search forward or
backward.
MENU / P-FUNC
▪ Press and hold the button to change the folder (for MP3-
CD)
Resume function
This player is equipped with a resume function. That means the CD will start automatically at the
position, where the CD was stopped by last use.
ATTENTION! This function works only, when no other disc was insert meantime into the player.
If you wish to start with track 1, press the button repeatedly until track 1 is shown in the
display.
Playing modes
Press repeatedly the “MENU / P-FUNC” button during the playback to change the following
functions:
During CD playback
ONE
▪ Repeat the current track
ALL
▪ Repeat the complete disc
INTRO
▪ Play the first 10 seconds of each track
RAND
▪ All the tracks on the disc will be played in random sequence.
No display
▪ Function is de-activated