Operation Manual

12
Using the Alarm
Setting the alarm
Note: Ensure that your radio has picked up the correct time and date
from the radio signal before you set an Alarm.
Repeatedly press the ‘Info’ button until the time and date is displayed.
There are 2 alarm settings available.
1. In DAB
+
press and hold "Info" button until "Station Sort" appears;
In FM, press and hold "Info" until "Alarm Set" displays.
2. In DAB
+
repeatedly press the ‘Info’ button until ‘Alarm Set’ is displayed.
Press ‘Enter’ to select.
3. ‘Alarm 1’ will flash in the top right of the display. Press the or
button to change between ‘Alarm 1’ and ‘Alarm 2’. Press ‘Enter’ to
select.
4. ‘OFF’ will flash in the display. Press the or button to scroll to the
frequency for your alarm. You can choose from ‘DAILY’, ‘DATE’,
‘WEEKDAY’, ‘WEEKEND’, ‘WEEKLY’, ‘ONCE’, or ‘OFF’. Press
‘Enter’ to select.
5. The alarm time will now flash. Press the or button to scroll to the
hour for your alarm (24 hour clock) and press ‘Enter’ to select.
6. Press the or button to scroll to the minutes for your alarm and
press ‘Enter’ to select.
7. Press the or button to scroll to the volume level for your alarm
and press ‘Enter’ to select.
8. Press the or button to scroll to
the mode for your alarm, ‘BUZZ’
(Buzzer) or ‘RADIO’. Press ‘Enter’ to select. A bell icon will be
displayed to confirm that the alarm is set.
Note: If you select ‘RADIO’, then the alarm will use the radio mode and
station (DAB
+
or FM) that you last listened to. If the DAB
+
radio
station you were listening to is not transmitting at the time of the
alarm, the Buzzer will sound instead.
Stop the alarm
When the alarm sounds, press the power button on the top of the radio to
stop the alarm. Alternatively, you can press any button and the radio will
go into ‘Snooze’ mode. A ‘Z’ will be displayed and the alarm will sound
again in 5 minutes.