Operation Manual

7
DAB OPERATION
M_ DAB400SI / English Instruction Manual
BATTERY POWER
---Station order
1. In DAB menu, press the “ ” or “ ” button to select “Station order”.
2. Press the “
” button to confirm.
3. Press the “
” or “ ” button to select below station order method:
1) Multiplex
2) Alphanumeric
3) Active
4. Press the “
” button to confirm.
---Factory reset
5. In DAB menu, press the “ ” or “ ” button to select “Factory reset”.
6. Press the “
” button to confirm. Display will show “Press ‘SEL’ to confirm reset”.
7. Press the “PRESET” button to start reset. Display will show “Do not power off”.
8. All setting will be cancelled and restore to factories setting.
---SW version
RATING:
3. In FM menu, press the “ ” or “ ” button to select “SW version”.
4. Press the “
” button to confirm. Software version information will show on display.
FM 87.5-108MHZ, DAB+ BAND III, 174.928-239.200MHz, POWER SOURCE
& POWER CONSUMPTION
Insert 3.7V rechargeable Lithium-ion battery into the battery compartment. Be sure that the battery are
inserted correctly to avoid damage to the appliance. Routinely check the battery’s charge status.
Carefully monitor battery that are approaching the end of their estimated life.
Please consider replacing the batte
ry with a new one when the battery charge time increase or
ba
SPECIFICATION:
FM：87.5-108 MHz
DAB+ BAND III, 174.928-239.200MHz
POWER INPUT:DC 5V --- 1000mA Li-ion battery
RECHARGEABLE BATTERY: DC 3.7V --- 1000mAh
SPEAKER IMPEDANCE: 4 ohm
POWER CONSUMPTION: 5W
ttery run time decrease significantly.