Operation Manual

DAB950 / English Instruction Manual
6
SETTING TIMER
You can use the setting timer to make the unit automatically turn on and off at a certain time
every day from standby.
The clock must be correctly set for the timer to operate correctly.
1. Set the unit in Standby mode
2. Press the TIMER button to the on/off timer function.
3. Press and hold the TIMER button for timer setting . Select source by , then input time
for timer on by numbers on RC, then set volume by , after that, input the time for timer
off by numbers on RC.
4.
For all steps, you need to press the TIMER button to confirm and go to the next step. If there is
no operation in 10 seconds, it will be exit automatically. If the selected source is BUZZER,
then the TIMER OFF setting is not available.
SOUND QUALITY
Adjusting the volume
To increase or decrease the volume, rotate the V-/+ button on the unit or press the V-/+ buttons
on the remote control.
If you want to turn off the sound, press the button on the remote control. Press the button
again or press the V-/+ button to resume normal listening or rotate the NAVIGATEbutton at
the top of the unit
Note:
If you adjust the volume above 26, then power off and power on again, the volume will restore
to the factory setting automatically.
Adjusting the Bass
Press the USERbutton on the remote control, then press the BASS -/+buttons on the
remote control to increase/decrease the bass.
Adjusting the Treble
Press the USER button on the remote control, then press the TREBLE -/+buttons on the
remote control to increase/decrease the treble.
Preset Equalizer
You can select sound characteristics such as CLASS/POP/ROCK/JAZZ/NORMAL by
pressing the EQ button.
BLUETOOTH OPERATION
You can listen to tracks from a media device if it is connected to the unit via Bluetooth.
Pair Bluetooth-enable Devices
You need to pair your Bluetooth device with this unit before you connect them for the first time.
In order to avoid interferences, de-activate Wi-Fi on your device (smartphone, tablet, etc…)
when playing music using Bluetooth.