Disc-3005 MICRO COMPONENT WITH MP3 / CD PLAYER & DIGITAL PLL RADIO INSTRUCTION MANUAL Please read and follow this instruction manual carefully before using the unit and retain it for future reference
MPCD-9K1 INSTRUCTION MANUAL SAFETY INSTRUCTIONS WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 1. Read instructions - All the safety and operating instructions should be read before the appliance is operated 2. Retain instructions - The safety and operating instructions should be retained for future reference. 3. cleaning – Unplug this product from the wall outlet before cleaning. Do not use liguid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4.
MPCD-9K1 INSTRUCTION MANUAL Follow the advice below for safe and appropriate operations. ON PROTECTION AGAINST LASER ENERGY EXPOSURE • As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. • Stop operation immediately if any liquid or solid object should fall into the cabinet. • Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not operate properly. • Do not put anything in the safety slot.
MPCD-9K1 INSTRUCTION MANUAL TABLE OF CONTENT WELCOME! ...................................................................................................................................................... 4 ABOUT THIS MANUAL .................................................................................................................................. 4 INDEX TO PARTS AND CONTROLS ............................................................................................................. 4 FRONT VIEW ..
MPCD-9K1 INSTRUCTION MANUAL WELCOME! Thank you for purchasing the Music System. Before operating the unit, please read this manual thoroughly and retain it for future reference. ABOUT THIS MANUAL - Instructions in this manual describe the controls on the remote. You can also use the controls on the unit if they have the same or similar names as those on the remote. The icon indicates the task can only be done on the unit. INDEX TO PARTS AND CONTROLS FRONT VIEW 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13.
MPCD-9K1 INSTRUCTION MANUAL SIDE VIEW 32. Support Bracket REMOTE CONTROL SECTION 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. 43. 44. 45. 46. 47. 48. 49. 50. 51. 52. 53. STANDBY Button PLAY/PAUSE Button TUNER/BAND Button CD Function Button AUX Function Button ST/MO Button EQ Button ALB UP Button MUTE Button Button STOP Button TIMER/PRESET/REPEAT Button VOL + & VOL - Button ALB DN/MEMORY Button MODE Button SLEEP Button TUNING << >> Button 0-9 Button INTRO Button RANDOM Button Button DISPLAY SECTION D1. D2.
MPCD-9K1 INSTRUCTION MANUAL INSTALLATION FOR TABLE TOP Lay the main unit and speakers face down on a soft surface to prevent scratching of the front panel. Insert the support bracket into the square holes at rear cabinet. Installing the support bracket into different square holes can adjust the unit angle to 45 or 20 degrees. Slide up the support plate until it is locked. This product is designed for placing vertically or horizontally. Remove the support plate for horizontal placement.
MPCD-9K1 INSTRUCTION MANUAL GETTING STARTED SPEAKER CONNECTION 1. Insert the speaker cables by pushing down the terminal lever of the Left Speaker Terminal (#29) and the Right Speaker Terminal (#30). 2. Connect the left speaker to Left Speaker Terminals (#29), with the white wire to R+ and the black wire to R-. 3. Connect the right speaker to Right Speaker Terminals (#30), with the white wire to L+ and the black wire to L-. LINE IN (AUX IN) CONNECTION 1.
MPCD-9K1 INSTRUCTION MANUAL CLOCK SETTING The following procedures can be accomplished by using the remote or controls on the unit. Unless otherwise stated, indicates the task can only be done on the unit. the function numbers are for the remote The icon NOTE: The clock has to be set the first time you use the unit. If the unit is disconnected from the mains for more than I minute, you will need to reset the clock. TO SET THE CURRENT TIME For example to set the clock at 7:30 AM 1.
MPCD-9K1 INSTRUCTION MANUAL COMPACT DISC OPERATION The following procedures can be accomplished by using the remote or controls on the unit. Unless otherwise stated, the function numbers are for the remote. The icon indicates the task can only be done on the unit. NOTE: This player plays not only commercial CDs but also home-recorded CD-R/RW music discs. PLAYING A CD 1. 2. 3. 4. Press the button (#33) to turn on the unit. Press the CD Button (#36) to operate the unit in CD mode.
MPCD-9K1 INSTRUCTION MANUAL NOTE: - Press the button (#34), the track number blinks to indicate the CD is in the pause mode. - Press the REPEAT button once (#44), “RPT 1” (D10) indicates in the display. - Press the REPEAT button (#44) twice, “RPT ALL” (D10) indicates in the display. - Press the RANDOM button (#52), “RND” (D6) indicates in the display. Press again to resume to normal play. - Press the INTRO button (#51), “INTRO” (#D7) indicates in the display. Press again to resume to normal play.
MPCD-9K1 INSTRUCTION MANUAL MP3 DISC OPERATION The following procedures can be accomplished by using the remote or controls on the unit. Unless otherwise stated, the function numbers are for the remote. The icon indicates the task can only be done on the unit. NOTE: This player plays not only commercial CDs but also self-complied CD-R/RW discs. PLAYING A MP3 CD 1. 2. 3. 4. Press the button (#33) to turn on the unit. Press the CD Button (#36) to operate the unit in CD mode.
MPCD-9K1 INSTRUCTION MANUAL PROGRAMMING MP3 CD TRACKS With this function you can program up to 20 titles in the order you desire. 1. Power on the unit and insert the CD. 2. Press the CD button (#36) to operate the unit in the CD mode. 3. Place the CD, with label side outward, inside the CD compartment. Press the OPEN/CLOSE button (#13) again to close the CD door . The unit will automatically start playing. 4. Press STOP button (#43) to stop playing. 5.
MPCD-9K1 INSTRUCTION MANUAL NOTE ON CD-R/RW DISCS Because of non-standardized format definition / production of CD-R/RW, playback quality & performance are not guaranteed. Manufacture is not responsible for the playability of CD-R/RW due to recording conditions such as PC performance, writing software, media ability, etc. Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
MPCD-9K1 INSTRUCTION MANUAL 5. While the indicator “PGM” is blinking, press the TUNING << or >> button (#49) to select the desired preset channel. 6. Press the MEMORY Button (#46) again to save the preset channel. 7. Tune to another station and repeat steps 3 to 5 to store the station in another preset channel. TO RECEIVE PRESET STATIONS 1. Press button (#33) to turn on the unit. 2. Press the TUNER button (#35) to operate the unit in the radio mode. 3.
MPCD-9K1 INSTRUCTION MANUAL DECREASING THE SLEEP PERIOD 1. 2. 3. When the unit is ON, press the sleep button repeatedly until the desired sleep period is reached. The time decreases to 90 60 45 30 20 10 0 minutes and can be set from 120 minutes down to 0 minutes. The unit will automatically turn off after the set time has elapsed. To cancel the Sleep operation, press the SLEEP button repeatedly and release when “0” is displayed or simply switch the unit to standby.
MPCD-9K1 INSTRUCTION MANUAL TROUBLE SHOOTING GUIDE If you experience difficulties in the use of this music system, please check the followings. Symptom Radio Noise or sound distorted on AM or FM broadcasts. Possible Cause Solution Station not tuned properly for AM or FM FM: Wire antenna is not extended. AM: The bar antenna is not positioned correctly. FM STEREO does not appear on You have tuned to a mono station or display. station too weak. AM or FM, no sound. Unit not at Tuner function, AM or FM band.
MPCD-9K1 INSTRUCTION MANUAL SPECIFICATION Power Source ---------------------------- AC230V ~50 Hz DC 3V, 1 x “CR2025” size lithium battery for Remote Control (included). Power Consumption ------------------ 28 Watts Dimension ----------------------------Unit 290 (W) x 84 (D) x 208 (H) mm Speaker 160 (W) x 84 (D) x 208 (H) mm Tuning Range/Sensitivity ---------------- AM 522 ~ 1629 kHz/2000 µV/m FM 87.
