Operation Manual

DISC4020 / English Manual
ENG 6
C. Pre-set EQ function
This unit provides 4 differences sound mode to enhance your listening experience. You can select the desired effect by pressing
the “ Preset EQ ” button (14) repeatedly at following sequence:-
FLAT CLASSIC ROCK POP JAZZ
E. Display function(On remote control)
For convenience usage, press “ Display/ID3 “when system is on at any mode, the LCD display (1) will show the current time.
F. Snooze function
During the alarm on mode, press “ Snooze “ button(7) once to terminate the alarm mode temporarily, and system will re-start
again after 9 minutes on each press. To cancel the alarm, press the “ Alarm “ (8) button or On/Standby button (12) while system
is on.
Aux-in connection
Connect another audio device, e.g. (portable) CD player, MP3 player, (portable) Cassette player, etc. to this system via a audio
cord with RCA plugs (not supplied).
Connect one end of this cord to the external device and the other end to the Aux-in jack (20) on the back of the unit.
When connected in this way and select to Aux mode by Function button (13). it is possible to play back the music already on the
connected device.