FC-1000
Function 1. Volume 2. Tuning radio frequency 3. Hour and minute display 4. Backlight 5. Alarmtime 6. Timeset wheel (turning backwards only) 7. Timeset wheel 8. Sleep LED indicator 9. Radio on/off Technique FM frequency AM frequency Clock format Alarm format Batteries DC adaptor Powerconsumption 10. Sleep on/off 11. Snooze 12. Alarm on/off 13. DC jack 14. Alarm by radio/buzzer 15. Bandswitch AM/FM 16. Sleep 30-60-90 min. 17. Battery comp. Radio 18. Battery comp.
Flip Clock Alarm Radio Operating Instructions Features ♦ Flip Clock with Snooze Alarm ♦ AM/FM radio ♦ Battery operated or powered via AC adaptor Installing the Batteries 1. Open the battery compartment cover on the underside of the unit. 2. Insert 4 x AA batteries following the polarity markings shown inside the battery compartment. Two of the batteries are for the clock, the other two are for the radio, as indicated. The radio batteries also power the buzzer alarm and night light. 3.
Setting the Alarm 1. Set the Alarm Time by turning Alarm Time Dial. The Alarm time works on a 12 hour cycle, so if you set your alarm for 07:00, it will also sound at 19:00 2. Press the Alarm On/Off Button to turn the Alarm on. The button will pop up to indicate that it is set. 3. You can choose to wake to either Radio or buzzer – set this using the Alarm Mode Switch. 4. Press the Snooze Button .to suspend the Alarm by 5 minutes. 5. Press Alarm On/Off Button to switch of the alarm.