Manual

ICD1010 / English Instruction Manual

• Prune invalid

Delete all radio stations which are not receivable anymore.

• Dynamic range compression (DRC)

If you are listening to music with a high dynamic range in a noisy environment, you may wish to

compress the audio dynamic range. This makes quiet sounds louder, and loud sounds quieter.

You can change DRC as off, low or high.

• Station order

You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid.

Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid lists

valid stations first, alphanumerically, then off-air stations.

FM radio mode receives analogue radio from the FM band and

displays RDS (Radio Data System) information about the station

and where broadcast.

To manual scan, press and hold “ / ” button. The frequency

display starts to run and scans the FM band and stops at the next

station.

To fine tune press the “ / “ button on the Remote Control

or on the unit.The unit search in 0.05 MHz steps.

Preset

To store an FM radio preset, press and hold the “PRESET” button until the display shows the

“Save preset” screen. Select one of the presets to save the current station and press “OK” to

confirm.

To select a preset, press the “PRESET” button, then select one of the listed preset stations and

press “OK” to confirm. Or press 0 to 9 on the Remote Control to directly recall the presets.

Now playing information

While the stream is playing, the screen shows its frequency, or if RDS signal is available, station

name and any further RDS information such as program name, title and other details. Stereo

broadcasts are indicated with an icon at the bottom of the screen. To view further information,

press the “INFO” button.

Each time you press “INFO” button on the radio, another set of information is displayed, cycling

through Radio text, program type, frequency and today’s date.