User Manual

ICD2020 / English Instruction Manual

• Station order

You can choose the order of the DAB station list to be either Alphanumeric, Ensemble or Valid.

Ensemble lists groups of stations that are broadcast together on the same ensemble. Valid lists

valid stations first, alphanumerically, then off-air stations.

FM radio mode receives analogue radio from the FM band and

displays RDS (Radio Data System) information about the station

and where broadcast.

To full scan, press “INTRO” remote key. The frequency display

starts to run and scans the FM full band.

To manual scan, press and hold “ ” or “ ” button on panel or

“P+” or “P-“ remote key. The frequency display starts to run and

scans the FM band and stops at the next station.

To fine tune press the “ “ or “ ” remote key. The unit search in

0.05 MHz steps.

• Preset

To store an Internet radio preset, press and hold the “PROGRAM” button on Remote Control

until the display shows the “Save preset” screen. Select one of the

40 presets to save the

current station and press “OK” to confirm. Or press 0 to 9 on the Remote Control to store the

current playing station into the preset directly.

To select a preset, press briefly the “PRESET” button or “PROGRAM” button on Remote, then

select one of the listed preset stations and press “OK” to confirm. Or press 0 to 9 on the

Remote Control to directly recall the presets.

• Now playing information

While the stream is playing, the screen shows its frequency, or if RDS signal is available, station

name and any further RDS information such as program name, title and other details. Stereo

broadcasts are indicated with an icon at the bottom of the screen. To view further information,

press Info button on the radio.

Each time you press “INFO” button on the radio, another set of information is displayed, cycling

through Radio text, program type, frequency and today’s date.