Operation Manual

IR3000DAB / English Instruction Manual
Page 3
2. Getting Started/Set up
The various listening modes have different requirements:
 Internet Radio requires a suitable internet broadband connection (usually via a local wired or
wireless network).
 Music Player requires connection to a wired or wireless network.
 DAB/FM requires a DAB/FM broadcast signal via the built in antenna.
 Aux-In requires connection via the Aux-In socket.
Connect the unit to a suitable power source using the power supply provided. After showing a
starting screen, it will enter the last used listening mode. When the unit is started for the first time, the
setup is launched automatically.
2.1 Setup Wizard
When the unit is started for the first time, it runs through a setup
wizard to configure settings for date/time and net work. Once this
has finished, the system is ready to use in most modes.
Note: To change these settings later, select Menu>System settings
>and select the required settings option(s)(see section 4
settings for further detail(s).
To run the setup wizard again, select Menu > System settings >
Setup Wizard.
Select Yes to start the setup wizard.
If you choose NO, the next screen asks if you would like to run the wizard next time the unit is
started. The system then starts without configuring time/date and network settings and enters the
Main Menu.
Note: If power is removed while the wizard is in progress, the wizard will run again next time
the unit is started.
The Setup wizard guides you through the basic setup parameters for time/Date and Network
connection. For details see the relevant settings in section 4 Settings. To change any settings later
all setting functions are accessible from the Settings Menu.