Operation Manual

IR3000DAB / English Instruction Manual
Page 4
3. Operation
To select a Mode, press Mode repeatedly until the required Mode splash screen is displayer. After a
brief moment the unit switches to that mode. The last station or track previously used in that m ode is
selected. If this is not possible, the unit scans for relevant stations, networks, or prompts the user for
appropriate input. See the relevant Mode section for details of how to use each listening mode.
3.1Menu Navigation
The primary control for moving through menus and options is the Select Control. Rotate the control
to move up or down a menu. Once the required option or value is highlighted press the Select
Control. All menus and lists act as loops such that turning the control to go beyond the first or last
entry in a menu or list takes you to the opposite end of the menu or list. So going up from the first
entry in a menu will take you to the last option in the menu, etc.
A scroll bar appears on the right of the screen if there are more options above or below those visible
To enter the menu tree in a particular mode press Menu. To move back a menu level press Back. To
exit the menu system, press Menu again.
Each mode has a Mode menu, with options specific to that mode.
For example, the FM mode menu has two mode specific options:
Scan setting and Audio setting.
In addition, each mode menu has two final options: System settings
and Main menu>. The >indicates options lead to further menus.
The System settings menu present system setting functions to
allow the user to setup how the unit behaves. This includes network,
time, language and software parameters.
The Main menu presents and alternative method for selecting
listening
Modes plus sleep and alarm functions.
Some menus, for example the System settings menu, have several
submenus.
A menu map for the various listening modes and the System Settings
and Main menu shown on the following page.