Operation Manual

IR3000DAB / English Instruction Manual
Page 10
4.2.3 View Settings
Displays the settings details for the current network setup, including:
 Active connections
 MAC Address
 Wlan region
 DHCP
 SSID
 IP Address
 Subnet mask
 Gateway address
 Primary DNS
 Secondary DNS
4.2.4 Wlan region
Presents a list of regions to configure the appropriate wlan behavior of the unit Select the appropriate
region for the location in which the unit will be used.
4.2.5 Manual Settings
There are also other options for viewing and manually altering network settings from Menu > System
settings> Network >(for example setting up a wired network).
Users experienced with networking may find these options useful for diagnosing and fixing network
problems.
Wired/Wireless
DHCP enabled/disabled
SSIP
Authentication
Encryption type
Passphrase/key
4.2.6 Network profile
This displays a list of the networks remembered by the unit (up to a maximum of 4). You can see the
list of registered networks through Menu> System settings> Network > Network profile>From
here you can delete unwanted networks by turning and pressing Select then confirming delete Yes.
4.2.7 Keep Network connected
This function helps to keep active the WiFi connection, once the device will be switched into Standby,
so that the Internet connecting going quicker after reboot. You can choose to activate or deactivate
this function from Menu> System settings> Network >Keep network connected ? YES or NO
Default setting is being in YES.
4.3. Time/Date
 Set Time/Date
 Auto Update
 Set Format