Operation Manual

IR3000DAB / English Instruction Manual
Page 24
Station order
You can choose the order of the DAB station list to be either Alphanumeric,Ensemble or Valid.
Ensemble lists groups of stations that are broadcast together on the same ensemble, for example
BBC or South Wales local Valid lists valid stations first, alphanumerically, then off-air stations..
To change station order, select Menu> Station order >then Alphanumeric Ensemble or Valid.
8. FM radio mode
FM radio mode receives analogue radio from the FM
band and displays RDS (Radio Data System) information
about the station and show (where broadcast).
To enter FM mode, either press Mode until the display
shows FM Radio select Menu > Main menu > FM.
8.1 Selecting stations
To find a station, pres Select. The frequency display starts to run up as this unit scans the FM band.
Alternatively, you can scan up or down by tune manually with quick presses, or by turning the Select
control.
Note: Scanning can be set to search for strong signals only, (see 8.3 Settings below).
Preset stations can be stored and recalled as described in Presets.
8.2 Now playing information
While an FM station is playing , the screen shows one of the two following sets data:
 If RDS information is available, by default the service name (i.e. station name ) is displayed. You
can cycle through further RDS information by pressing Info. Each time you press Info , another
set of information is displayed, cycling through RDS radio text, RDS programme type ,
frequency and today’s date.
 If no RDS information is available, the currently tuned frequency is shown.