Operation Manual

IR3000DAB / English Instruction Manual
Page 26
Note: If you press Back or Menu to exit the Alarm settings without saving, a dialogue screen is
displayed asking if you wish to save the changes or not. The Now Playing, screen shows active set
alarms with an icon at the bottom left. The Standby screen shows active set alarms with an icon and
the alarm time.
At the set time, the alarm will sound. To temporarily silence it, press Snooze .
Pressing Snooze repeatedly cycles through the available snooze periods:
5 Mins,10 Mins,15 Mins,30 Mins
The radio returns to standby for the set period, with the silenced alarm icon flashing and a countdown
of the remaining snooze period After the set snooze time the alarm will sound again.
Note: During a snooze period, to change the snooze time press Snooze to select a new snooze time.
Any remaining snooze time is reset to the selected time period.
To cancel a sounding alarm, or an alarm in snooze, press Standby or Alarm.
10.2 Sleep
To set the sleep timer, press the Sleep key repeatedly to cycle
through the sleep time options:
Sleep OFF,15 MINS,30 MINS,45 MINS or 60 MINS.
Stop when the required time is displayed, after a brief moment
the screen returns to the screen being used before the sleep
function was selected.
On the Now Playing screens the remaining sleep time is
displayed at the bottom of the screen.
Alternatively select Menu>Main menu > Sleep and select from the sleep time options.Once
youselect a sleep period, the system returns to the main menu. Press Menu to return to the Now
playing screen.
To cancel a sleep time, select Sleep OFF from the sleep options using either of the above methods.
Note: A sleep time is automatically cancelled if this unit is put into Standby.