Operation Manual

DVD System Setup

Downmix

Select “Lt/Rt” in DOWNMIX, the player will output the audio signal in mixed mono.

Select “Stereo”, then the player will output a stereo signal.

Dolby Digital Setup

The Dolby Digital Setup menu will appear.

Select “Speaker Setup” using the ▲▼ direction buttons

and press OK to confirm. Select an option value to be

set using the ▲▼ direction buttons, or press ◄ to

cancel setting. After OK; you return to the main menu

using ◄.

Dual Mono

The function is used to select from Stereo, L-Mono, R-Mono and Mix-Mono.

Dynamic

Use this item to adjust linear dynamic compression rate to get different signal compression

effects.

Video Setup Page

The Video Setup menu will appear:

Select the submenu "Quality" using the direction

buttons ▲▼ on the remote and press OK to confirm.

Select further options and an option value to be set

using the ▲▼ direction buttons on the remote and

press OK to confirm, or press ◄ to cancel setting. After

OK; you return to the main menu using ◄.

Sharpness

This menu allows the settings for the

sharpness of the picture: High, Medium or

Low . Select "Low" for a soft image and

"High" to improve a blurry image.

Brightness and Contrast

Used to set the brightness and contrast of

the image.

Gamma

This menu allows the settings for the

gamma of the picture: None, Low, Medium

or High.

Hue and Saturation

Used to set the hue and saturation of the

image.