DEUTSCH ENGLISH FRANÇAIS NEDERLANDS ROMÂNĂ MCD 7400USB
ENGLISH LOCATION OF CONTROL 1) LCD DISPLAY 2) USB SLOT 3) SD CARD SLOT 4) PLAY / PAUSE / USB 5) SKIP + 6) STOP 7) SKIP – 8) BAND SELECTOR 9) REMOTE SENSOR 10) FM STEREO INDICATOR 11) REC 12) MODE 13) VOLUME + 14) ALBUM 15) VOLUME – 16) FUNCTION SWITCH 17) CASSETTE DOOR 18) CASSETTE RECORD ● 19) CASSETTE PLAY ► 20) CASSETTE REWIND ◄◄ 21) CASSETTE FORWARD ►► 22) CASSETTE STOP ■ 23) CASSETTE PAUSE || 24) SPEAKER JACKS (L / R) 25) FM ANTENNA 26) BEAT CUT 27) AC POWER CORD 1) REC 2) BIT RATE 3) USB / SD 4) 0
ENGLISH BATTERY INSTALLATION Insert 2 x “AAA” size batteries into the battery compartment. Be sure that the batteries are inserted correctly to avoid damage to the remote control. Always remove the batteries when the remote control will not be used for a long period of time, as this will cause leakage to the batteries and subsequently damage to your set. Notes: - Use batteries of the same type. Never use different types of batteries together.
ENGLISH CD OPERATION PLAY / PAUSE ► Press to start playing CD / MP3 disc. Press again to stop playing CD / MP3 operation temporarily. Press again to resume playback. SKIP + >>| & SKIP – |<< Press to go to the next track or back to the previous track. Press and hold while playing until you find the point of the sound. STOP ■ Press to stop all CD / MP3 operation. 1. Set the “FUNCTION” selector to “CD / MP3 / USB” mode. 2.
ENGLISH PLAYBACK 1. Plug or slot in USB / SD card device to the port. 2. Set the “FUNCTION” selector to “CD / MP3 / USB” mode. 3. It will read and automatic playing USB / SD card, if no disc on disc tray. 4. It will read and automatic playing DISC, if have disc on disc tray. 5. Press and hold the “PLAY / PAUSE / USB” button for a few seconds to entry USB / SD mode. 6. Press and hold the “STOP” button for a few seconds to change play USB or SD card.
ENGLISH ENCODING FROM PROGRAMMED TRACK TO USB / SD CARD DEVICE 1. Select desired track into the program memory. 2. Press the “REC” button, the appliance will start recording the entire programmed track. SINGLE TRACK DELETE OF USB / SD CARD DEVICE 1. Be sure to plug slot the USB / SD card device to the port. 2. Press the “USB / SD” button on the remote control to choose the desired media. 3. Press the “STOP” button to stop the auto playback. 4.
