Operation Manual

ENGLISH
EN5
III. BASIC OPERATION.
1. POWER ON: Insert the plug into the wall socket and turn the socket on.
2. STANDBY: Press the STANDBY button to resume the STANDBY and PLAY mode.
3. SIGNAL SELECTION: Press "INPUT" button can be chose the CD / USB / RADIO / BLUE
format, each time press the button can be chose one format.（When the disc door open, the
switch function will not be worked）
4. Adjusting the volume
To increase the volume:
1). Press the VOL control on the front panel, or press and hold the VOL+ button On the
remote control.
2). The LCD display will briefly show the selected setting.
To reduce the volume:
1). Press the VOL control on the front panel, or press and hold the VOL- button on the remote
control.
2). The LCD display will briefly show the selected setting.
To mute the sound:
1). Press the MUTE button, the LCD displays 'Mute ', press MUTE again to turn off, the LCD
not displays Mute.
5. SETTING THE CLOCK:
The internal clock operates in 24-hour mode. Can set dual Alarm and Sleep function.
The clock may be set when the system is playing or when in standby mode.
Time Setting
1). Time and alarm setting
Press SET button to enter to the time setting, the setting order is：time setting、alarm 1
setting、alarm 2 setting, when there’s "XX:XX" show on the display and flashes, you can
adjust the time, press " " button can adjust the hour, press " " button can adjust the
minute. （Alarm voice setting: Enter the alarm setting press INPUT button can choose
CD/USB/ FM/ buzzer four alarm ringing modes.）
Setting order as bellow:
2). Alarm setting
Alarm can be set to alarm1 /alarm2/dual alarm/alarm off four modes，Press ALARM button on
the remote control to switch to Alarm modes, the display would be showed the corresponding
pattern ，there’s no display when alarm off，when setting dual alarm, the early time will be
worked. When the alarm rang, press SNOOZE or STANDBY button can be stop.
Setting the sleep function:
Setting the sleep time while playing, repeatedly press the SLEEP button on the remote
control to cycle through the range:120>90>60>45>30>15 minutes, the LCD display then
returns to the previously selected mode. It will go to the STANDBY mode in your setting time;
press the SLEEP button can cancel the sleep function until there’s no‘SLEEP’displayed.
Snooze function:
At the preset alarm time, when the alarm is ringing, press the SNOOZE button to interrupt the
alarm temporarily and sleep another 9 minutes. Snooze function will continue each time you
press on the snooze button.
To stop Snooze function, press the STANDBY button. Without pressing snooze button, after
60 minutes, the alarm will stop automatically.
Note: The clock time settings will be lost when the system is switched off when the main plug is
removed
00:00
Alarm 2 setting
12:00
00:00
Time setting
Alarm 1 setting