Operation Manual

ENGLISH
EN6
6. USING THE FM RADIO
Press "INPUT" Button to select FM. Frequency 87.5 to 108 MHz.
Station search function（Pull out the antenna, the signal will be better received）
A．Whilst listening to a station press the buttons /TUNE- or /TUNE+ to tune up or
down the current frequency in 0.05MHz steps，long press the above buttons can search the
previous or next stations，the display will show the corresponding information, it won’t stop
until there’s the station.
B．The channel of the tuner will switch automatically when the station is stereo and the signal
is strong enough, it will play with stereo, the display will show ((ST)); otherwise it will play
with Mono, and the display will show nothing.
Store and recall a preset station
This unit has 20 presets for FM radio to facilitate the play of the station.
1）Preset stations
When playing the current station，press PROGRAM / MEMORY button, the number of the
station flashing on the display. Press FOLDER-/PRESET- or FOLDER+/PRESET+ button
can change the position of the current station，when the number stops flashing or press
PROGRAM / MEMORY button, the station will store in the current position, there’s the
corresponding display on the LCD.
2）Scan function
In the current position, long press FOLDER-/PRESET- or FOLDER+/PRESET+ button，can
scan the station forward or backward，It will stored when there’s the radio signal，can save
up to 20 stations，It will play from the first station when the preset full，there’s the
corresponding display on the LCD.
3) Play the preset station
When power on, press INPUT and to choose FM，long press FOLDER-/PRESET- or
FOLDER+/PRESET+ button to scan the preset stations，after it, you can press the number
keys to search the station, or press FOLDER-/PRESET- or FOLDER+/PRESET+ button
search the preset station and play.
(NOTE：Power off, the preset stations will no longer be memorized)
Use of the number keys
Select each of the tracks you wish to play using the numeric buttons. If you require to
programmer a track above 10, use the +10 button. Each press of this button will increase the
selection by ten. For example:
To programmer track 12, press the 2 button and then press the +10 button once.
To programmer track 20, press the 10 button and then press the +10 button once.
FM 93.50
((ST))
MHz