Operation Manual

ENGLISH
EN8
Skip forwards or backwards through tracks
1. To select the next track, press the button. If you are on the last track of the CD Disc
（USB）, the player will return to track 1.
2. To go back to the previous track press the button. If you are on the track 1 of the CD,
the player will go to the last track on the CD Disc（USB）.
3. To play a particular track press either or buttons until the track number required is
shown on the LCD display.
4．When the songs are stored in the multiple folders， press FOLDER-/PRESET- or
FOLDER+/PRESET+ button can forward or backward switching between folders
Programmed track selection
You can set your CD Disc（USB） Player to play a preset selection of tracks.
1. Press the so the CD Disc（USB） is not playing then press the PROGRAM / MEMORY
button. The LCD display will show 00-P-01 and PROG word. The first two digits 00 are where
the selected track number is entered, P-00 is the program counter which will increment after
a track is entered.
2. Press either or buttons until the required track number is shown. The LCD displays
the selected track and the program counter which has incremented to 001-P-01.
3. Press the PROGRAM / MEMORY button again, the LCD will now display 000 P-01 and is
ready for another track to be entered.
4. Repeat steps 2 and 3 above until all the tracks are stored.
5. To clear a program so the program counter is reset to 000-P-01 press the button.
6. To play the programmed tracks press the button.
7. When playing a program you can skip through the programmed selection using the and
buttons.
8. After all the programmed tracks have been played, the CD Disc（USB） player stops
automatically and your programmed selection is cleared.
Note: There can be up to a maximum of 20 tracks stored; the same track can be stored more
than once.
Press button can cancel the program playing，the word PROG on the LCD will disappear.
Use of the number keys
Select each of the tracks you wish to play using the numeric buttons. If you require to
programmer a track above 10, use the +10 button. Each press of this button will increase the
selection by ten. For example:
To programmer track 12, press the 2 button and then press the +10 button once .
To programmer track 24, press the 4 button and then press the +10 button twice.
Others function：
：：
：
Press MODE button when playing, can switch the functions: Repeat one、Repeat folder、
Repeat all、Random play、Intro play，press one can switch on function，there’s the
corresponding display on the LCD.
CD MP3
0 0 1—0 1 : 2 6
1
CD MP3
0 0 1 —0 1 : 2 6
FOLDER
CD MP3
0 0 1—0 1 : 2 6
ALL
CD MP3
0 0 1 —0 1 : 2 6
INTRO
CD MP3
0 0 1—0 1 : 2 6
RANDOM