User Manual

M_MCD5500SW

English Instruction Manual

B) Copying of MP3 file

If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the “ ” button (4). The

operation procedures is same as CD encoding as stipulate on above, and the system will switch to copying mode only if MP3 file

being read.

C) DAB encoding

1. Operate tuner mode refer above listening to radio section to receive the station you would like to encode.

2. Press the “ ” button twice (4) until the unit will display flashing with “REC USB” icon. Encoding is now performing.

3. After finish of recoding, press “stop ” button (3) until the symbol “REC USB” disappear.

D) Cassette/Phono encoding

1) Plug in the USB pen drive or SD/MMC card for recording (make sure it had enough empty space).

2) Set the unit to your desired encoding mode by function button (10) such as “tape” mode or phono…etc and then start to

playback the track would like to encode, then press the “ ” button (4) twice.

3) The LCD display (2) will flash with “REC USB” icon. Now the system is starting the encoding mode.

4) Start playback of cassette tape or your external Aux device which the track you prepare to encoding to MP3 format.

5) After finishing of recoding, press “stop ” button (3) until the symbol “USB” & “REC USB” disappear.

E) track separation (On remote control only)

You can divide the recording music from tape or DAB…etc in to USB track by track during encoding. Every time when press the

“ ” (track separation) button (on remote control) once during encoding from tape or Aux in, the system will generate a new

track and continuous the recording. The text “SAVE” at LCD display will flash one time, it mean the unit is creating a new track

successfully.

F) Copying of MP3 file

If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the “ REC” button (3). The

operation procedures is same as CD encoding as stipulate on above, and the system will switch to copying mode only if MP3 file

being read.

File delete at USB / SD card (by remote control)

The system is able to erase the file stored inside the USB pen drive by following:-

1炽 Insert the media storage and set at “USB” mode.

2炽 Press the “delete” button and the LCD display (2) will show (del ---001)

3炽 Press skip forward or skip backward button to select the file going to delete

4炽 Press the “delete” button to enter “yes/no” mode and then press skip forward or skip backward to select “yes” or

“no”.

5炽 Press the “delete” button again to confirm the setting.

Remark:

- Press “stop” button once at remote handset to quite delete mode

Phono

Noted:

- Remove the stylus protector.

- Be sure that the tone arm is being detached from the tone arm rest before operating and

re-secured again afterwards.

Stylus assembl

Cartridge