User manual

MCD5500 / English Instruction Manual
2
LOCATION OF CONTROLS
1) Turntable cover
2) LCD display
3) Stop /Enter button
4) Record button
5) Standby LED indicator
6) On/Standby button
7) Earphone jack
8) USB Socket
9) Cassette door (1)
10) Function button
11) SD card slot
12) Mem/Clock-Adjust button
13) Skip/tuning Down button
14) Cassette 1 control key
15) CD tray
16) Play/Pause /band button
17) Preset EQ button
18) Remote sensor
19) Volume knob
20) Tone control knob
21) Cassette door (2)
22) Folder/Preset Up button
23) Skip/Tuning Up button
24) Cassette 2 control key
25) CD tray open/close button
26) Spindle adaptor
27) Turntable speed selector
28) Auto switch
29) Pick-up holder
30) Antenna socket
31) Line out socket
32) Speaker socket
33) AC cord
34) Aux-in jack
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous
radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Important:
Since movement of the CD mechanism and the sensitive circuitry may cause interference to the radio tuner nearby, switch this
unit off while operating other radio devices
Precautions for use
Installation
 Unpack all parts and remove protective material.
 Do not connect the unit to the mains before checking the main voltage and before all other connections have been made.
 Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.
Connection
1. Plug in the AC cord (33) to the AC outlet. The unit will go to standby mode and the LCD display (2) will dim light up.
2. Turn on the unit (6), if the LCD display (2) is on with backlighting, it means the power supply is normal. Now your system is
ready to play the music.