User manual

MCD5500 / English Instruction Manual
4
FM-Stereo reception
 Press the “ Enter ” knob (3) repeatedly, the FM programs are receiving in mono and stereo mode repeatedly. In particular
when stereo signals are weak, it is preferable to receive the program in Mono.
Hints for best reception:-
- FM/DAB : the receiver work with detachable DAB/FM wire antenna, make sure the antenna is plugged into the antenna
socket (30), totally unraveled and proper located for the best reception.
Aux-in connection
- Connect the unit to other device by connecting the Aux in jack (34) with a 3.5mm cable(not provided) and other end connect
to the external device such as Discman/MP3 player to perform the music playback or encoding function etc.
1. Press the Function button (10) to Phono/Aux position.
2. Adjust the Volume Control Knob (19) to desired volume level.
3. Start to play your external device.
Playing Compact Disc
 Getting start
- Press Function button (10) to select “ CD ” mode.
- Push the CD tray open (25) to open the CD tray.
- Place a CD with the printed side facing up and then close the CD tray.
- Focus search will performing and the LCD display (2) will show the total number of tracks & total playing time. Then, the unit
will start to automatically.
- Turn Volume knob (19) to the desired volume level.
 Play / Pause mode
1. To interrupt, press the “ Play/Pause ” button (16) once. Press again to resume normal playback.
 Stop mode
1. If “ Stop ” button (3) is pressed during play or pause mode, system will go to stop mode.
 Skip mode (skip up / skip down )
1. During play or pause mode, if “ skip up ” button (23) is pressed. It will go to next track and display the track no. and then
remain the play or pause mode.
2. During play or pause mode, if “ skip down ” button (13) is pressed. It will go to the previous track, original track no. is
display and remain the play or pause mode.
 For MP3 Disc
1. After focus search is performing, the total number of track and album will be shown on the LCD display (2). The unit will start
to plat directly.
2. Turn “ Folder/ Pre up /down ” knob on the remote control to select the folder number.
3. Press “ Skip Up or Skip Down ” button (23/13) to select the track number.
ID3/Display function (on remote control only)
Press the “ Info “ button repeatedly, the LCD display (2) show “ file ”during playback of MP3 file, the song file/album/song/artist
name is being displayed few seconds in sequence . Then will change back to current clock time.
Remark:-
- In that case of no name or not supportive languages had been assigned for the track, LCD display will blank (2) when press
the Info button.
- No Title/Album name can be recognized if the input format on the Disc is not supporting by the system.
- The system support only English and Arabic number for ID3 function.