User manual
MCD5500 / English Instruction Manual
5
MP3 track format requirement:-
- Bit rate : 32 kbps~320kbps, sampling rate : 32khz, 44.1khz and 48 kHz decodable
- The performance of playing MP3 Disc is various from the quality of recording disc and the method of recording. Furthermore,
the searching lead-time for MP3-CD is longer than normal CD due to difference format.
Repeat/Random mode (on remote control only)
Press the “ Play Mode ” button on the remote control during playback to select repeat and random function, a single track, all the
tracks repeat or folder repeat(MP3 only) and random can be played in difference mode as follow:-
For CD
(1) repeat 1 (2) repeat all track (3) random (4) off mode
Play mode Indicator on LCD display
Repeat track Rep1
Repeat all Rep A
Random Rand
Off mode --------------
For MP3 Disc
(1) repeat 1 (2) repeat 1 folder (3) repeat all tracks
(5) off mode (4) random
Play mode Indicator on LCD display
Repeat track Rep1
Repeat folder Rep F
Repeat all Rep A
Random Rand
Off mode --------------
Repeat play
You can listen the desired track, folder(for MP3 only) or whole disc repeat by this function.
Random play
You can listen all the tracks in a random order by this function.
CD programming
Up to 20 tracks can be programmed for disc play in any order. Before use, be sure to press the “ stop ” button (3).
1. Set in CD mode & stop the CD playback.
2. Press the “ Mem/Clk-Adj ” button (12) and “ MEM ” will appear on LCD display (2).
3. Select a desired track by pressing skip up or down button (23/13).
4. Press the “ Mem/Clk-Adj ” button (12) to store the track into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if necessary.
6. When all the desired tracks have been programmed, press “ Play/Pause ” button (16) to play the disc in assigned order.
7. Press “ Stop ” button (3) to stop playback, press Stop button again to clear all stored memory.
The programming mode will automatically stop if no button is being pressed in a period of about 10 seconds after pressing
the “Mem/Clk-Adj ” button.