Manual

MCD5550 / English Instruction Manual
4
FM-Stereo reception
⚫ Press the “ Enter ” knob (3) repeatedly, the FM programs are receiving in mono and stereo mode repeatedly. In particular
when stereo signals are weak, it is preferable to receive the program in Mono.
Hints for best reception:-
- FM/DAB : the receiver work with detachable DAB/FM wire antenna, make sure the antenna is plugged into the antenna
socket (30), totally unraveled and proper located for the best reception.
Bluetooth® connecting and Playback
1. Press “Function” button to select (10) Bluetooth® mode.
2. The LCD display (2) will flashing with “ Bluetooth® “ , it means the BT is ready for connection & under searching mode.
3. Switch on the Bluetooth feature of your BT device (such as mobile phone) and select “ MCD5550… ” on the BT equipment
to connecting.
4. Once the connecting was finish and connect successfully, the word “ Bluetooth® “ will be remained without flashing on LCD
display (2).
5. Start to playback your BT device and enjoy the music from the main unit.
6. To disconnect the Bluetooth connection, press and hold the “Play/Pause ” (16) button
Remarks
- You can press the “Play/Pause ” (16), “Skip Up or Skip Down button” (23/13) of the main unit or remote to
control the music playback.
Aux-in connection
- Connect the unit to other device by connecting the Aux in jack (34) with a 3.5mm cable(not provided) and other end connect
to the external device such as Discman/MP3 player to perform the music playback or encoding function etc.
1. Press the Function button (10) to Phono/Aux position.
2. Adjust with Volume Control Knob (19) to desired volume level.
3. Start to play your external device.
Playing Compact Disc
⚫ Getting start
- Press Function button (10) to select “ CD ” mode.
- Push the CD tray open (25) to open the CD tray.
- Place a CD with the printed side facing up and then close the CD tray.
- Focus search will performing and the LCD display (2) will show the total number of tracks & total playing time. Then, the unit
will start to automatically.
- Turn Volume knob (19) to the desired volume level.
⚫ Play / Pause mode
1. To interrupt, press the “ Play/Pause ” button (16) once. Press again to resume normal playback.
⚫ Stop mode
1. If “ Stop ” button (3) is pressed during play or pause mode, system will go to stop mode.
⚫ Skip mode (skip up / skip down )
1. During play or pause mode, if “ skip up ” button (23) is pressed. It will go to next track and display the track no. and then
remain the play or pause mode.
2. During play or pause mode, if “ skip down ” button (13) is pressed. It will go to the previous track, original track no. is
display and remain the play or pause mode.
⚫ For MP3 Disc
2. After focus search is performing, the total number of track and album will be shown on the LCD display (2). The unit will start
to plat directly.
3. Turn “ Folder/ Pre up /down ” knob on the remote control to select the folder number.
4. Press “ Skip Up or Skip Down ” button (23/13) to select the track number.