Modell MDV-8700 WARNING : SHOCK HAZARD-DO NOT OPEN AVIS: RISQUE DE CHOC ÉLECTRONIQUE - NE PAS OUVRIR WARNUNG: ELEKTROSCHOCK GEFAHR - NICHT ÖFFNEN Bitte vor Inbetriebnahme sorgfälltig lessen Read instructions carefully before using the unit Avant de metre en service votre appareil, lisez attentivement ce instructions
WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS - All operating instructions should be followed. 5.
BEFORE CONNECTION CAUTION 1. Turn off the power of all equipment before making connections. 2. Read instructions of each component you intend to use with this appliance. 3. Be sure to insert each plug securely. To prevent hum and noise, do not bundle the connection cords of speaker cord. CONNECTION to VIDEO OUT to SPK ( L / R ) TV to a wall outlet speaker ( L / R ) AC POWER You can power your appliance by plugging the AC power cord at the back of the appliance into a wall AC power outlet.
LOCATION OF CONTROL 1. FM STEREO INDICATOR 2. REMOTE SENSOR 3. FUNCTION SELECTOR 4. STOP 5. TUNING CONTROL 6. SKIP 7. VOLUME DOWN 8. POWER 9. TIME SET 10. HOUR 11. OPEN / CLOSE 12. LCD DISPLAY 13. BAND SELECTOR 14. PLAY / PAUSE 15. USB SLOT 16. SD CARD SLOT 17. SKIP + 18. VOLUME UP 19. N / P 20. L / R 21. MINUTE 22. VIDEO 23. S-VIDEO 24. OPTICAL 25. COAXIAL 26. Cr / Pr 27. SCART OUT 28. FM ANTENNA 29. AC CORD 30. BATTERIES BACKUP 31. Cb / Pb 32. Y 33. SPEAKER JACK (L / R) 34.
REMOTE CONTROL 1. GOTO 21. PLAY 2. PROGRAM 22. TV SYSTEM 3. SUBTITLE 23. SLOW 4. 1-10+ 24. CLEAR 5. AUDIO 25. ZOOM 33 1 2 3 30 29 4 6. MUTE 26. PBC 7. VIDEO 27. SHUFFLE 8. ANGLE 28. RETURN 5 9. SETUP 29. TITLE 7 10. STOP 30. MENU 9 11. PREVIOUS 31. DISPLAY 12. NEXT 32. LANGUAGE 10 13. REPEAT 33. STEP 11 32 31 28 26 6 24 8 22 27 25 23 21 20 13 14. A-B 15. VOLUME DOWN 19 12 17 14 15 18 16 16. VOLUME UP 17. BACKWARD 18. FORWARD 19. PAUSE 20.
RADIO OPERATION GENERAL OPERATION 1. 2. 3. 4. Set the “FUNCTION” selector to “RADIO” mode. Select desired band by using the “BAND” selector. Adjust radio frequency to your desired station by using the “TUNING” control. Adjust the “VOLUME” control to the desired level. FM / FM-STEREO RECEPTION - Set the “BAND” selector to FM mode for MONO reception. - Set the “BAND” selector to FM ST. mode for FM STEREO reception. The Stereo indicator light up to show FM ST. mode.
CD / MP3 OPERATION GENERAL OPERATION PLAY / PAUSE Press to start playing CD / MP3 disc. Press again to stop playing CD / MP3 operation temporarily. Press again to resume playback. SKIP + SKIP - Press to go to the next track or back to the previous track. Press and hold while playing until you find the point of the sound. & STOP Press to stop all CD / MP3 operation. PLAYBACK 1. 2. 3. 4. Set the “FUNCTION” selector to “CD / MP3” mode.
CD / MP3 OPERATION PROGRAM It is possible to program the tracks you wish to play in sequence of your choice. Program mode is activated while in stop mode. If the unit is playing, press the “STOP” button first and turn on the TV set. 1.
USB / SD OPERATION GENERAL OPERATION PLAY / PAUSE Press to start playing tracks from the USB / SD card. Press again to stop playing USB / SD operation temporarily. Press again to resume playback. SKIP + SKIP - Press to go to the next track or back to the previous track. Press and hold while playing until you find the point of the sound. & STOP Press to stop all USB / SD operation. PLAYBACK 1. 2. 3. 4. Plug or slot in USB / SD card to the port.
DVD / VCD OPERATION GENERAL OPERATION 1. PLAY / PAUSE BUTTON Under the stop mode, press it once to start playing. A. During the play mode, press it once to interrupt the playing and show the static picture. B. Press it again to continue playing 2. PREV / NEXT BUTTON Under the state of play or pause, press it once to skip one chapter or one music forward or backward, then continue playing. 3. REV / FWD BUTTON A.
DVD / VCD OPERATION 9. ANGLE (CD not valid) Press the “ANGLE” button on the remote control in sequence to choose the angle of the scenes. (As to those DVD recorded without multi- angular, not valid). 10. LANGAUGE When playing DVD disc A. Press the “AUDIO” button on the remote control to select audio channel 1 output. B. Press it again to select audio channel 2 output. Note: Audio channel 1,2... is the music style recorded in disc, if the disc does not has such characteristic, “NOT VALID” will appear. 11.
FUNCTION AND OPERATION EXPLANATION A LIST OF MENU SETTING ITEMS SETUP MENU......
FUNCTION AND OPERATION EXPLANATION LANGUAGE SETUP PAGE OSD LANG ENGLISH GERMAN SPANISH AUDIO LANG CHINESE ENGLISH JAPAN FRENCH SPANISH PORTUGUESE GERMAN LATIN SUBTITLE LANG CHENESE ENGLISH JAPAN FRENCH SPANISH PORTUGUESE GERMAN OFF MENU LANG CHINESE ENGLISH JAPAN FRENCH SPANISH PORTUGUESE GERMAN LATIN E-13
FUNCTION AND OPERATION EXPLANATION AUDIO SETUP AUDIO OUT SPDIF/OFF SPDIF/RAW SPDIF/PCM VIDEO SETUP BRIGHTNESS CONTRAST HUE SATURATION SPEAKER SETUP DOWNMIX LT/RT STEREO VSS DIGITAL SETUP OP MODE LINE OUT RF REMOD DYNAMIC RANGE DUAL MODO STEREO MONO L MONO R MIX MONO E-14
FUNCTION AND OPERATION EXPLANATION Explanation for each setup 1). SYSTEM SETUP The setup structure is as following: • TV SYSTEM There are four types of TV system setting in this system: NTSC, PAL60, PAL and AUTO. Select a different setting according to your TV system. • SCREEN SAVER There are two modes of ON or OFF in this unit. Under the ON mode, if the stop state is more than four minutes during DVD function, the SCR, screen saver picture appears.
FUNCTION AND OPERATION EXPLANATION • PASSWORD The initial setting for this item is “Password lock-in” that means you cannot carry out the “RATING” selection or change the password at present. If you want to carry out RATING setup, you must first enter the initial password “0000” by using the number keys on the remote control, then press ENTER button to confirm; To change the password, you need to enter the initial password first, then enter the new password (four numbers).
FUNCTION AND OPERATION EXPLANATION 3). AUDIO SETUP The setup structure is as follows: -AUDIO OUT Press the direction button to select the audio out mode you want, then pressing the ENTER key to confirm it. There are three kinds of audio out mode in this unit: SPDIF/OFF, SPDIF/RAW and SPDIF/PCM.
OTHER FEATURE JPEG PICTURE PLAYING Use the buttons to enter the Directory Region and highlight the desired directory, then choose the desired JPEG picture and press the “ENTER”, the picture will be show full screen on TV. Press the “RETURN” to go back to the Directory serene. ZOOM 1. When playing JEPG pictures, press the “ZOOM” button to enlarge or reduce the picture from “ZOOM 2” “ZOOM 3” “ZOOM 4” “ZOOM 1/2” “ZOOM 1/3” “ZOOM 1/4” “ZOOM OFF”. 2.