Operation Manual

To make sure the turntable can play the record
with different standard completely, a hole
with ‘NO OPEN’ pvc plate located at the back
of the unit to adjust the screw inside the
turntable.
When the turntable stop early and auto-
return, pls. use a screw driver to turn the screw
inside the hole about 45 degree in clockwise
direction. If the record still can not be played
completely, stop play and re-turn the screw 45 degree
in clockwise direction again, till the turntable can
play the record completely and then auto-return.
When the turntable cann’t stop and auto-return,
but keep turning after playing the record completely,
pls. use a screw driver to turn the screw inside the hole
about 45 degree in couter-clockwise direction. If the
turntable still cann’t stop and auto-return, stop play
and re-turn the screw 45 degree in couter-clockwise
direction again, till the turntable can stop and auto-
return after playing the record completely.
IMPORTANT!
RADIO REC
LINE OUT
L
R
AUX IN
RADIO REC
LINE OUT
L
R
AUX IN