Operation Manual

M_NR545DAB
/
English
Instruction Manual
4
Recall preset stations
1. Press the Mem/Clock-Adjust button (21) once to enable recall state
2. Press Skip/ Pre up/down button (14/15) to select the desired memory station.
3. Press Memory/Clock-Adjust button (21) to confirm the recall memory station.
 The pre-set memories will be cancelled completely if dis-connecting the main power supply and back up battery did not
installed. You are recommended to switch the system into standby mode for convenience usage.
 There are 3 seconds for program state, after 3 sec. This state would resume to normal tuner mode automatically.
 You can overwrite a present station by storing another frequency in its place.
FM-Stereo reception
 Press the “Enter” knob (23) repeatedly; the FM programs are receiving in mono and stereo mode repeatedly. In particular
when stereo signals are weak, it is preferable to receive the program in Mono.
 If stereo signal is being received, the stereo indicator “ ” will appear on LCD display (6) to show FM Stereo program is
now receiving.
Hints for best reception:
- FM: the receiver work with detachable DAB/FM wire antenna, made sure the antenna had plugged into the antenna socket
(32) and totally unraveled for the best reception.
Playing Compact Disc
 Getting start
1. Press Function button (5) to select “CD” mode.
2. Push the CD tray open (16) to open the CD tray.
3. Place a CD with the printed side facing up and then close the CD tray.
4. Focus search will performing and the LCD display (6) will show the total number of tracks & total playing time. Then, the unit
will start automatically.
5. Turn Volume knob (17) to the desired volume level.
 Play / Pause mode
1. To interrupt, press the “Play/Pause ” button (12) once, digit will flash on the LCD display (6). Press again to resume
normal playback.
 Stop mode
1. If “Stop ” button (13) is pressed during play or pause mode, system will go to stop mode.
 Skip mode (skip up /skip down )
1. During play or pause mode, if “skip up ” button (15) is pressed. It will go to next track and display the track no. and then
remain the play or pause mode.
2. During play or pause mode, if “skip down ” button (14) is pressed. It will go to the previous track, original track no. is
displayed and remain the play or pause mode.
 For MP3 Disc
1. After focus search is performing, the total number of track and album will be shown on the LCD display (6). The unit will start
to plat directly.
2. Turn “Folder/Tuning up /down ” knob (23) to select the folder number.
3. Press “Skip Up ” or “Skip Down ” button (14/15) to select the track number.
ID3/Display function
Press the “Info” button (19) repeatedly; the LCD display (6) show “file” during playback of MP3 file, the song
file/album/song/artist name is being displayed few seconds in sequence. Then will change back to current clock time.
Remark:-
- In that case of no name or not supportive languages had been assigned for the track, LCD display will blank (6) when press
the Info button (19).
- No Title/Album name can be recognized if the input format on the Disc is not supporting by the system.
- The system support only English and Arabic number for ID3 function.
MP3 track format requirement:
- Bit rate: 32 kbps~320kbps, sampling rate: 32khz, 44.1khz and 48 kHz decodable
- The performance of playing MP3 Disc is various from the quality of recording disc and the method of recording. Furthermore,
the searching lead-time for MP3-CD is longer than normal CD due to difference format.