DEUTSCH ENGLISH FRANÇAIS NEDERLANDS Hersteller Wörlein GmbH Gewerbestrasse 12 D 90556 Cadolzburg GERMANY ESPAÑOL PORTUGUÊS NORSK SVENSK Tel.: +49 9103/71670 Fax.: +49 9103/716712 Email. info@woerlein.com Web: www.woerlein.
ENVIRONMENTAL PROTECTION Do not dispose of this product with the normal household waste at the end of its life cycle. Return it to a collection point for the recycling of electrical and electronic devices. This is indicated by the symbol on the product, user manual or packaging. The materials are reusable according to their markings. By reusing, recycling or other forms of utilization of old devices you make an important contribution to the protection of our environment.
Table of Contents Safety Warnings ....................................................................................................................... 3 Battery Safety Guidelines ......................................................................................................... 5 Pack Contents .......................................................................................................................... 6 Product Overview ..................................................................
Disc (audio CDs and MP3/WMA discs) Operation ................................................................... 18 Disc Playing ...........................................................................................................................................18 To Skip Search and Play........................................................................................................................18 To Search and Play.............................................................................
Safety Warnings - Read all the instructions carefully before using the unit and keep them for future reference. - Retain the manual. If you pass the unit onto a third party make sure to include this manual. - Check that the voltage marked on the rating label matches your mains voltage. Dame - Please inspect the unit for damage after unpacking.
Batteries - Batteries used in the remote control for this unit are easily swallowed by young children and this is dangerous. Keep loose batteries away from young children and make sure that the battery holder tray is secure in the remote control. Seek medical advice if you believe a cell has been swallowed. Please dispose of batteries correctly by following the guidance in this manual.
GB-5
Pack Contents Make sure all of the following contents are included.
Product Overview 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
Remote Control Overview 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30.
Installation of Battery 1. Remove the insulating mylar strip from the battery. It is located at the bottom back side of the remote control. 2. Loosen the screw on the battery compartment cover with a screwdriver. Pull out the battery 3. Replace a new battery (size 2025) correctly and fully insert the battery compartment back to the original position. Tighten the screw with a screwdriver.
Remote Control Operation Range Remote sensor 6m directly in front of the unit Point the remote control to the unit no more than 6 meters from the remote control sensor and within 60° horizontally and 20° vertically of the front of the unit. The operating distance may vary according to the brightness of the room. Note: Make sure that there is no obstacle between the infrared remote sensor of the unit and remote control. If you install the unit on rack, etc..
Connections Caution: Make all connections before plugging the unit into the AC Power outlet. Connecting the DAB/FM Antenna 1. Connect the supplied DAB/FM Antenna to the DAB/FM Antenna socket on the rear of the unit. 2. If reception is poor, connect the outside antenna. Note: Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outside antenna), disconnect the supplied DAB/FM wire antenna.
ECO-Power/Clock Mode Features Switching ON / OFF the the button, the unit switches to the last selected source. STANDBY button to switch the unit back to clock mode. STANDBY Switching the system to ECO Power/Clock mode Long pressing the STANDBY for 2 seconds or more to switch to ECO Power or clock mode. * ECO Power mode The clock will not be displayed. Press the CLOCK button to display the clock on the LCD. * Clock mode The clock display on the LCD.
Manual Synchronzies Clock Time In DAB/RDS station, long pressing INFO button for 2 seconds or more to select to CT (clock time). When received and display a correct CT time, then using D /C buttons to select "Manual SYMC" and press the BF time. Sound Quality Adjusting the Volume To increase or decrease the volume, rotate the - VOLUME + knob on the unit or press the VOL +/- buttons on the remote control. Mute sound You can mute the sound temporarily.
DAB+ Radio Operation Caution: Before listening to the radio, please check that the DAB/FM Antenna is correctly connected and adjusted for length and direction. Store DAB+ radio stations automatically 1. Rotate the SOURCE knob on the unit or repeatedly press button on the remote control to select DAB source. The word “DAB” will be displayed on the LCD. 2. Press the SCAN button to activate automatic program mode. The word “SCANNING” will be displayed on the LCD.
DAB+ Information Display You can view the DAB+ service information in the following modes. Depending on the DAB+ radio station you are tuning to, some information modes may be unavailable. Repeatedly press the INFO button on the remote control to view the following information. Station Name When an RDS station is received, the name of that station will be displayed. Ensemble Name This displays the name of the multiplex that contains the station you are listening to.
FM Radio Operation Caution: Before listening to the radio, please check that the DAB/FM Antenna is correctly connected and adjusted for length and direction. Tuning in to a Station button on the remote control to 1. Rotate the SOURCE knob on the unit or repeatedly press select TUNER source. The word “TUNER” will be displayed on the LCD. 2. Select a station using one of the following methods.
To change the FM Reception Mode Press the BF button on the remote control to select the Stereo or Mono channel to receive the best FM reception mode. RDS (Radio Data System) Reception Many FM stations are broadcasting added data compatible with RDS (Radio Data System). This radio set offers convenient functions using such data. Press the INFO button repeatedly to select the information that displayed as follows.
Disc (audio CDs and MP3/WMA discs) Operation Disc Playing 1. Rotate the SOURCE knob on the unit or directly press button on the remote control to select DISC source. The word “DISC” will be displayed on the LCD. 2. Press the K button to open the disc door and place the disc on the disc tray (with the printed side up). 3. Press the K button to close the disc door, the unit will read the disc and play it automatically. Note: If in stop mode, please press the BF button to start playing the disc. 4.
6. Press the BF button to start programme play. 7. Press the L button once to stop the programme play. Press the L button twice to clear programme. Playing the Beginning (Intro) of each Track Press the INTRO button on the remote control to play the beginning of each track consecutively. The playing time of each track is 10 seconds. When you hear the desired track, press the BF button twice. Random Play The CD can be played randomly. Random play begins by pressing the RANDOM button on the remote control.
Use the USB Caution: Do not use a high-capacity USB hard disks. Only USB flash memory can be used. or memory cards) to this unit, you can enjoy the device's stored music through the unit. 1. Insert the USB device's USB plug into the socket on the rear of the unit. 2. Rotate the SOURCE knob on the unit or directly press button on the remote control to select USB source. The word “USB” will be displayed on the LCD. 3. The device's stored music will be played automatically. 4.
Play from Bluetooth device Note: * Pairing needs only to be done once. The operational range is approximately 10 meters. * Compatibility with all Bluetooth devices is not guaranteed. * Any obstacle can reduce the operational range. /AUX button on the remote 1. Rotate the SOURCE knob on the unit or repeatedly press control to select Bluetooth source. The word “BT” will be displayed on the LCD. 2. Activate the Bluetooth function in your Bluetooth device (see the device user manual). 3.
Set the alarm timer This unit can be used as an alarm clock. You can select DISC, TUNER, USB or DAB as the alarm source. Caution: Make sure that you have set the clock correctly. 1. In standby mode, long pressing the TIMER button on the remote control for 2 seconds or more, the “ ” will blink and the source is displayed, e.g. DISC. 2. Rotate the - VOLUME + knob on the unit or press the VOL +/- buttons on the remote control to select a source (DISC, USB, TUNER or DAB). 3.
Specifications Power Requirements : FM Tuning Range : DAB+ Frequency Range (band III) : Power Consumption : Output Power : THD : AC 220-240V 50/60Hz 87.5 - 108 MHz 174.928 - 239.200 MHz 18W 5W x 2 1% USB Port USB Memorization capability Speaker Impedance Speaker Input Power Dimensions DC 5V, 1A Maximum 32GB 4 5W 310(W) x 169(H) x 224(D) mm : : : : : Maintenance Cleaning the Unit Note: Ensure the unit is fully unplugged from the mains socket before cleaning.
- If you cannot wipe off the dust with a soft cloth, wipe the disc lightly with a slightly moistened - Do not use any type of solvent such as thinner, benzine, commercially available cleaners or antistatic spray. They may damage the disc. Storing Discs - Do not store discs in places subjected to direct sunlight or near heat sources.
- Timer does not work As a power-saving feature, the system turns off automatically 15 minutes after disc play reaches the end and no control is operated. - Set the clock correctly. Switch on the timer. Clock/timer setting erased Poor radio reception - - Fully extend and adjust the DAB/FM antenna. - Cannot display some files in USB device device has exceeded a certain limit. This phenomenon is not a malfunction. supported. USB device not supported - The USB device is incompatible with the unit.
The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.