User’s Guide 14" Colour TV/DVD Manual del Usuario TV/DVD 14" Color Guide d’utilisation TV/DVD 14 pouces Couleur PC1320PTVD
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The graphic symbols on the back cover of the set mean the following: The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Never tamper with any components inside your set, or any other adjustment controls not mentioned in this manual. All television receivers are high voltage instruments. Your PICTURE TUBE is a highly vacuum. If broken, glass fragments will be violently expelled. Scratching, Chipping or undue pressure is dangerous and should be avoided. When you clean the PICTURE TUBE FACE or CABINET, the power cord should be removed from the wall socket then wipe the receiver with a dry soft cloth.
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.
FORUK ONLY For you convenience a mains plug has been fitted to this appliance. For your safety please observe the following information. 1. Should the fuse in the plug part remove the plug from the wall socket and replace the fuse with a 3 Amp ASTA approved to BS 1362 fuse. 2. Never use the plug without the fuse cover fitted. Replacement fuse covers are available from your dealer or most electrical retail outlets. 3.
LOCATION OF CONTROLS 1. Power Button 2. Power indicator 3. DVD Tray 4. TV/AV/DVD Button 5. Channel Up/Down Button 6. Menu Button 7. Volume +/- Button 8. Play / Stop Button 9. Remote sensor 10. Open / Close Button 11. Front Audio (R) Input (AV 2) 12. Front Audio (L) Input (AV 2) 13. Front Video Input (AV 2) 14. Earphone Jack 15. Speaker 16. 75 ohm Antenna Socket 17. Scart connector (AV 1) 18.
ENGLISH Skull-Insert into the jacks on the top of the unit.
REMOTE CONTROL 1. 13. Subtitle Button Power Button 2. Skip ( ) Button 14. Two or Three Digital program Button 3. Skip ( ) Button 15. Display Button 16. Zoom Button 4. Language Button 5. Pause/Stop ( / ) Button 17. DVD MENU Button 6. Mute Button 18. Setup Button 7. Menu Button 19. TV/DVD Mode Button 8. Channel + ( 9. Volume+ ( 10. Channel - ( 11. Volume- ( + ) Button + ) Button - ) Button - ) Button 12. Numeric (0~9) Buttons 8 20. Input Button 21. Open/Close ( ) Button 22.
REMOTE CONTROL ENGLISH Before using the remote control, batteries must first be installed. HOWTO INSTALL BATTERIES 1. Slide the battery compartment cover out. 2. Install two (2) “AA” batteries (not included) into each remote, paying attention to the polarity diagram in the battery compartment 3. Replace the battery compartment cover. CAUTION: 1. Only adults should replace batteries. 2. Do not mix old and new batteries. 3. Do not mix different types of batteries.
ONLY FOR PAL- I OPERATING THE TELEVISION Connect your TV aerial to the aerial input socket located on the back of the TV. Push the Main Power Switch, Power Indicator will be illuminated. After few seconds the TV screen will light up and will show interference on the screen. The TV will require tuning into the available TV stations in your area.
ONLY FOR PAL- BG Connect your TV aerial to the aerial input socket located on the back of the TV. Push the Main Power Switch, Power Indicator will be illuminated. After few seconds the TV screen will light up and will show interference on the screen. The TV will require tuning into the available TV stations in your area.
C. SYSTEM 1. Press the “ +/-” button to select the C SYSTEM then press “ desired colour system PAL,NTSC,AUTO. +/-” button to change the S SYSTEM 1. If the unit is the single sound system,it is fixed and cannot be adjusted. Notes: 1. If ghost / noisy stations have been stored when using the AUTO SEARCH method, these can be removed from the channel list by entering the SKIP Mode shown in the TUNE menu. Press the “ +/-” and change the OFF state to ON. Press the MENU button to return to normal viewing.
0 255 Press “ -”, the programme no. will appear on the top right corner and change from a higher to lower number. 2) Press “ ENGLISH CHANNEL SELECT AND VOLUME CONTROL 1) Press “ +/-” buttons to select TV station. Press “ +”, the programme no. will change from a lower no. to higher number. +/-” button to adjust sound level.
4. REMOTE CONTROL OPERATION CHANNEL Up and Down buttons Press the “ +/-” button to select a higher or lower channel number. 0~9 Numberic Button To select a TV station using A buttons 0~9. For example: Press number “9” button to select PROGRAMME “9”. l Two digit Programme Number For example:selecting PROGRAMME “12” 1. Press the -/-- button, on screen will show --. 2. Press the number “1” button,on screen will show “1-”. 3. Press the number “2” button,channel “12” will show.
BASICOPERATION 1. Press “TV/AV/DVD” button on the unit or press the TV/DVD direct key on the remote handset to turn on DVD. 2. Press “OPEN / CLOSE (EJECT)” ( ) button to load disc in disc tray. 3. Press “OPEN / CLOSE” ( ) button to close the tray. • Hold the disc without touching either of its surfaces, position it with the printed title side facing up. Play Discs 1. Press the OPEN/CLOSE ( ) button on the front panel and load the Disc on the tray. The label side should be facing upwards.
OPERATING YOUR DVD TO ACCESS THE MAIN MENUS: To access the four main menus, perform the following: 1. While in the DVD Stop mode, press the SETUP button to enter the Setup Menu. 2. Press the Navigation ( ) button to select the Main menus ( ), then press the PLAY/ENTER button. 3. Select one of the Setup icons at the top of the screen using the Navigation ( , ) buttons, then press the PLAY/ENTER button to select it. 4.
QUICK START MENU: Access the Quick Start menu as described on page 14, then select/change the setup option as described on page 15. PLAYER MENU OPTION: Select the PLAYER MENU to choose the desired language(English, French , Spanish, German, Italian, Portuguese, Nederland). > QUICK SETUP > < < TV ASPECT OPTION: Select 4:3 PS (Panscan), 4:3 Letterbox or 16:9 wide. See page 18 for details.
OPERATING YOUR DVD LANGUAGESETUPMENU: Select the Language icon using the Navigation ( , ) buttons, press the PLAY/ENTER button and then select/change the setup option as described on page 15. AUDIO LANG Select the language the DVD will be played back in. The DVD must be recorded in the selected language, DISC MENU Select the language the DISC MENU will be in. The DVD’s DISC MENU must be made in the selected language, otherwise the default language of the DVD will be shown.
DISPLAY SETUP MENU: Select the Display icon using the Navigation ( , ) buttons, then select/change the setup option as described on page 15. AUDIO SETUP MENU: Select the Audio icon using the Navigation ( , as described on page 15. DISPLAY 4:3 PAN&SCAN > TV ASPECT < > < TV ASPECT 4:3PS: Select when the unit is connected to a conventional TV. Video material formatted in the Pan Scan style is played back in that style (the left and right edges are cut off).
DVD BASIC OPERATION IMPORTANT NOTES: • A symbol will appear at the upper right corner on the TV screen during operation if you try to access a function that is not available on the disc. • Some discs may take a few seconds to load. • Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side facing up, align it with the guides and place it in its proper position.
SKIP Press the SKIP ( Press the SKIP ( ) button to advance the DVD to the beginning of the next chapter. ) button to move the DVD to the beginning of the previous chapters. SEARCH During playback, press either the SEARCH ( ) button or SEARCH ( ) button to move the DVD forward or backward at double (x2) speed to locate a specific section. Repeatedly press these buttons and the speed will increase to x4, x8, x16 and resume normal playback.
CD BASIC OPERATION PLAYBACK OF A CD 1. Press “TV/AV/DVD” button on the unit or press the TV/DVD direct key on the remote handset to turn ON DVD. 2. Press the OPEN/CLOSE button to open the disc tray. Insert a disc with the label side facing up on the disc tray. 3. Press the OPEN/CLOSE button to close the disc tray. After loading, playback will start automatically. 4. Press the STOP ( ) button on main unit or press PAUSE/STOP ( / ) button on remote control twice to stop playback. FORWARD( ) / REVERSE( ) 1.
PLAYBACK OF A PICTURE CD 1. Press the “TV/AV/DVD” button on the unit or press the “TV/DVD”direct key on the remote handset to turn DVD. 2. Press the Open/Close button to open the disc tray. Insert a picture CD with the label side facing up on the disc tray. 3. Press the OPEN/CLOSE button to close the disc tray. After loading, the FOLDER/PICTURE menu will appear on the TV screen. Press the Navigation ( , ) buttons to select the desired folder/ track. 4. Press the PLAY/ENTER button to confirm.
ABOUT DISCS The region number for this DVD Player is : See the following page for information regarding region numbers. PLAYABLE DISCS: The following discs can be played back on this DVD player: DISC TYPES: DVD Data on most DVDs is divided into sections called “titles” and then into subsections called “chapters”, each of which is given a title or chapter number. Some features of this DVD player will not operate with some DVD discs as they are preset.
Your television is designed to give you trouble-free performance for many years. If you have a problem with your TV, try the solutions listed below. There is no picture or sound, or the TV doesn’t turn on. • Make sure the TV is plugged in. • Make sure the MUTE is not set. • Make sure the POWER is on. • Make sure a headphone is not inserted. • If there is neither picture nor sound, unplug the TV for 30 seconds, then plug it in and try again. There is no picture or sound on some UHF channels.
CARE & MAINTENANCE This television receiver represents a fine example of electronic engineering and construction. As such it should be treated with care. We offer the following suggestions so you will enjoy this product for the years to come. Keep it dry. If water should get on it, wipe if off immediately. Water contains minerals that can corrode electronic circuits. Do not store in hot areas.
TV SECTION Receiving Channels VHFL VHFH UHF Tuner Type DVD SECTION Laser Wave length Laser power : Signal System Digital audio output Headphone Stereo in DVD mode Mono in TV mode GENERAL SECTION AC Power Input AC Power Consumption Speaker Audio Output Dimensions Net Weight ENGLISH SPECIFICATIONS CH 2 - 4 CH 5 - 12 CH 21- 69 255 Channel , VS TUNING 655nm Class 1 PAL/NTSC output Coaxial digital output; pin jack AC 220-240V~ 50 Hz 74W 3” 78mm 8ohm x 2 1.5 W + 1.