P D V D - 1 6 3 0 9 C 2 P 一 主一 副 模拟屏 M T K 1 3 8 9 全贴 片 带电 池 不带 红 外线 功 能 过E R P2 USER'S MANUAL PDB-1800 PORTABLE DVD Before connecting, operating or adjusting this product, please read this user's manual carefully and completely.
Important Safety Instructions 1.Warning: To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer servicing to qualified personnel. 12.CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 2.Warning: To prevent fire or electric shock hazard, do not expose the unit to rain or moisture. 13.
Safety Precautions WARNING N Notes on Copyrights: RISK OF ELECTRIC SHOCK DO NOT OPEN 10. It is forbidden by law to copy, broadcast, show,broadcast via cable, play in public, or rent copyrighted material without permission. 1.Warning: This digital video disc player employs a laser system. Use of controls,adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation Exposure. 11.
Identification of Controls Main Unit 1.CARD SLOT MASTER TFT SCREEN 2. POWER ON/OFF 3. HEADPHONE OUT JACKS 4. VIDEO/AUDIO OUT 1 5. DIGITAL AUDIO OUT (COAXIAL) 6.USB 7. DC OUT 2 3 8. DC IN 9-12V 9. (PLAY/PAUSE) 4 5 10. UP 6 7 8 12. 11. DOWN STOP 13. SOURCE 14. MODE 15. UP 9 11 10 16. DOWN 13 12 17.LEFT /VOL18. RIGHT/VOL+ SLAVER TFT SCREEN 19. POWER ON/OFF 20. HEADPHONE OUT JACKS 21. AN IN 22.
Identification of Controls Remote control unit 17 16 STEP 1 19 2 MUTE SOURCE 3 4 5 6 7 8 9 0 10+ DISPLAY 18 SUBTITLE 20 TITLE AUDIO ENTER 21 25 27 22 24 26 MODE VOL- REPEAT MENU /PBC VOL+ SLOW ZOOM 1 5.10+ BUTTON In order to select a track 10 or greater, first press 10+, For example; select track 12, first press 10+, and then press number 2 button. 2 6. MENU/PBC Return to DVD root menu(DVD). PBC on/off switch (VCD) . 3 4 6 8 10 11 12 14 7.
Identification of Controls Remote control unit 15. BUTTON Press BUTTON allow skipping back at 5-level speed(X2->X4-> X8->X16->X32 -> PLAY), press PLAY button return to normal playback. 25.SLOW Press Slow button repeatedly to enter slow playback, and cycle between different speeds. The speeds are 1/2,1/4,1/8,1/16,and normal. 16.STEP Step the motion in DVD mode. 26.PROGRAM DVD/VCD:The program function enables you to store your favourite tracks from the disc.
4.Attach the DVD player with support to the horizontal bar until a click is Heard. Connecting Power To connect power from inside a car, connect the supplied car adapter to the DC IN 9-12V jack of the unit. To connect power from household power sources, connect the supplied power adapter to the DC IN 9-12V jack of the unit and to the mains socket. Caution! When you unplug the adapter, always pull the plug from the mains socket. Never pull the cord.
SETUP Menu Setting Angle Mark Displays current angle setting information on the right hand corner of the TFT screen if available on the disc. General Setup Page OSD Language You can select your own preferred language seetings. Press SETUP button to get the setup menu. Use direction buttons to select the preferred item. After finishing settings, press SETUP again to normal display.
SETUP Menu Setting Audio Setup Page Video Setup Page Video Setup Page Downmix This options allows you to set the stereo analog output of your DVD Player. - - VIDEO SETUP PAGE - - LT/RT :Select this option if your DVD Player is connected to a Dolby Pro Logic decoder. Stereo :Select this option when output delivers sound from only the two front speakers.
SETUP Menu Setting Preference Page Password Setup Page PAL - Select this if the connected TV is PAL system.It will change the video signal of a NTSC disc and output in PAL format. NTSC-Select this if the connected TV is NTSC system.It will change the video signal of a PAL disc and output in NTSC format. Auto:Chang the video signal output automatic according to the playing disk format. Password: select the menu password change page.
SLAVER TFT MENU SETTING PICTURE Page PICTURE BRIGHT CONTRAST COLOR ENGLISH RESET 50 50 50 Brightness Adjust screen Bright Setting. Contrast Adjust screen Contrast Setting. Color Adjust screen Color Setting. ENGLISH Adjust Menu OSD Language PICTURE SCREEN 16.
Parameters and specifications Battery Parameters Electronical parameters Battery Specifications: Output:7.4V Standard requirement Item Storage and work circumstances: 1. Storage circumstances Temperature Humidity Power requirements : AC 100-240 V , 50/60 Hz Power consumption : <15W Operating humidity : 5 % to 90 % VIDEO OUT 6 months -20 C ~ +45 C 65+20% 1 week -20 C ~ +65 C 65+20% 2.Work circumstances Temperature Output AUDIO OUT :1.