Modell PL-520USB Bitte vor Inbetriebnahme sorgfältig lesen.
LOCATION OF CONTROLS 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 23) 24) 25) 26) 27) 28) 29) DUST COVER LCD DISPLAY RECORD BUTTON SOURCE BUTTON POWER LED INDICATOR LEFT SPEAKER POWER OFF/FUNCTIONS SELECTOR 3.
z SET THE RADIO BAND SELECTOR (10) AT “FM-ST” POSITION FOR RECEIVING STEREO PROGRAMS. THE FM-STEREO LED INDICATOR (20) WILL LIGHT UP TO SHOW FM STEREO PROGRAM IS RECEIVING. HINTS FOR BEST RECEPTION:- AM : THE RECEIVER HAS A BUILT-IN AM BAR ANTENNA. IF AM RECECPTION IS WEAK, SLIGHTLY ROTATE OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION. FM : THE RECEIVER HAS A BUILT-IN FM WIRE ANTENNA HANGING AT THE REAR CABINET. THIS WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION.
SONG TITLE/FOLDER NAME SEARCH FUNCTION (BY REMOTE HANDSET) YOU CAN SEARCH THE TRACK BY THE TITLE/FLODER NAME IN DISC DURING STOP MODE:1. PRESS THE “ FIND “ BUTTON ONCE, THEN PRESS THE “SKIP UP ” (21) (OR SKIP DOWN ) BUTTON (13), YOU CAN SEARCH THE TITLE OF EACH SONG ONE BY ONE UNDER ALPHABET ORDER ON LCD DISPLAY, THEN PRESS THE CD “ PLAY/PAUSE/STOP ” BUTTON (14) TO START THE PLAYBACK OF THE SELECTED TRACK. 2. PRESS AGAIN “ FIND ” BUTTON, THE FOLDER NAME IS BEING DISPLAYED.
ENCODING OF CD/PHONO INTO MP3 FILE THE SYSTEM IS ABLE TO ENCODE THE PHONO TO MP3 FORMAT AND RECORDING AT MEMORY MEDIA WITH USB CONNECTING PORT OR SD/MMC CARD. A) PHONO ENCODING 1) 2) 3) 4) 5) SET THE FUNCTION BUTTON TO “ PHONO “ MODE AND THEN PRESS THE “ REC “ BUTTON (3) DIRECTLY. THE LCD DISPLAY WITH SHOW THE WORD “ USB CARD “ AND FLASHING, THEN PRESS SKIP UP (21) OR DOWN BUTTONS (13). TO SLEECT THE DESIRED SOURCE (USB OR SD) FOR ENCODING.
B) ALL FILES DELETE 1. PRESS AND HOLD THE “ INFO “ BUTTON FOR 3 SECONDS AND THE LCD DISPLAY (18) WILL SHOW (DEL ---001) 2. PRESS AND HOLD THE “ INFO “ BUTTON TO ENTER “ YES / NO “ MODE AND THEN PRESS SKIP OR SKIP BACKWARD TO SELECT “ YES “ OR “ NO “. FORWARD 3. PRESS THE “ REC “ BUTTON AGAIN TO CONFIRM THE SETTING. REMARK : ALL THE FILES INSIDE THE USB STORAGE MEDIA OR SD CARD WILL BE DELETED COMPLETELY AFTER CONFIRMING TO “ YES “ MODE.
TRACK SEPARATION (BY REMOTE HANDSET) YOU CAN DIVIDE THE RECORDING MUSIC FROM PHONO TO USB/SD TRACK BY TRACE DURING ENCODING. “ (TRACK SEPARATION) BUTTON ONCE AT REMOTE HANDSET EVERY TIME WHEN PRESS THE “ DURING ENCODING FROM PHONO TO USB/SD, THE SYSTEM WILL GENERATE A NEW TRACK AND CONTINUOUS THE RECRODING. THE TEXT “ PHONO “ AT LCD DISPLAY WILL FLASHING ONE TIME, IT MEAN THE UNIT IS CREATING A NEW TRACK SUCCESSFULLY.
