Instruction Manual Model PL 710 Turntable Radio
LOCATION OF CONTROLS 1 2 3 4 5 6 13 12 8 9 10 11 17 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 18 7 14 19 15 16 20 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) POWER KNOB POWER INDICATOR REPEAT FUNCTION PROGRAM FUNCTION PLAY / PAUSE MONO / ST.
CONNECTIONS POWER CONNECTION Connect the power cord to AC Outlet only. SPEAKER JACK Connect the SPEAKER PLUGS to the EXTERNAL SPEAKER JACKS(20) located on the rear of the unit. HEADPHONE JACK (PHONES) This unit will accept stereo headphones (not included) with a 1/8” plug and an impedance of 32 ohms or greater. The speakers are automatically disconnected when headphones are connected to the PHONES jack.
RADIO OPERATION 1) Turn the unit “ON” using the POWER Knob(1). 2) Select the desired radio band by selecting FUNCTION Knob(14) to AM or FM position. 3) Turn the TUNING Knob(16) to select the station frequency as desired. 4) Adjust VOLUME Knob(15) for the desired volume level. FM & FM-STEREO RECEPTION Set the FUNCTION Knob(14) at FM position. Programs are received in mono mode. When Stereo signals are weak, it is preferable to receive the program in mono. Press MONO/ST.
CD OPERATION 1) Set the FUNCTION Knob(14) to CD position. Open the CD Compartment(12) by pressing the OPEN/CLOSE Button(11). Put a CD into the compartment and close the CD door. 2) Focus search is performed if disc is inside.Total no.of tracks is read. PLAY/PAUSE MODE 1) If PLAY/PAUSE Knob(5) is pressed during STOP mode, the first track will be played and “01” will appear on display. 2) If PLAY/PAUSE Knob(5) is pressed during PLAY mode, it will go into PAUSE mode, The track no. will be flashing.
TROUBLE SHOOTING Power switch on, but no power * Check power to wall plug. * Check AC cord connection to wall plug. Tuner poor FM reception * Unravel and fully extend FM wire antenna for best reception. Power Indicator is on, but no sound from speaker * Check Function selector. * Check VOLUME setting * Make sure headphones are not plugged in. MAINTENANCE Power switch After using the unit, turn off the power by releasing the POWER switch.
