Operation Manual

ManualsBrandsSoundmaster ManualsAudioRCD1350

Location of controls

1) Leather handle

2) Memory button

3) Repeat/Ran button

4) Function button

5) Volume up/down knob

6) On/standby button

7) Mute button

8) Source button

9) Folder down/Alarm button

10) Folder up/Clk adj

11) Skip up

down button

12) Tuning knob

13) Play/pause button

14) Stop button

15) Snooze button

16) LCD display

17) USB socket

18) 3.5mm headphone jack

19) SD card slot

20) CD door open/close

21) Remote sensor

22) Dial pointer

23) FM-stereo LED indicator

24) Tuner LED indicator

25) Alarm sound mode selector

26) Rod antenna

27) Band switch

28) AC socket

29) Battery compartment (main unit)

30) Battery compartment (clock back up)

Caution:

Usage of controls or adjustments or performance of procedures other than those specified herein may result in

hazardous radiation exposure.

This unit should not be adjusted or repaired by anyone except qualified service personnel.

Precautions for use

Installation

• Unpack all parts and remove protective material.

• Do not connect the unit to the mains before checking the main voltage and before all other connections have been

made.

• Do not cover any vents and make sure that there is a space of several centimeters at the back of the unit for

ventilation.

AC connection

1. Connect the one end of the detachable power cord to the AC socket (28) and the other end to the ac outlet.

2. When you first plug the unit into the mains, the unit will go into standby mode.

3. Turn on the unit by On/Standby button (6), the TUNER LED indicator (24) will light up.

connection

For DC operation, please insert 6 pcs size C (UM-2) battery at batter compartment (29) as below direction:-

Summary of content (5 pages)

PAGE 1
Location of controls 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 23) 24) 25) 26) 27) 28) 29) 30) Leather handle Memory button Repeat/Ran button Function button Volume up/down knob On/standby button Mute button Source button Folder down/Alarm button Folder up/Clk adj Skip up /down button Tuning knob Play/pause button button Stop Snooze button LCD display USB socket 3.
PAGE 2
Setting the clock 1. 2. 3. Set unit in standby mode. Press and hold the “Folder up/Clk-adj ” button (10) a second, The minute digit flashing on the LCD display(16). Press skip up or skip down button (11) to set the correct minute. Press “ Folder up/Clk-adj ” button (10) to store the correct minute. or skip down button (11) to set the correct minutes. Then The hour digit will flashing, press the skip up press “ Folder up/Clk-adj ” button (10) to store the correct hour.
PAGE 3
2. 3. During play or pause mode, if Skip down button (11) is pressed, it will go back to the beginning of the track, same track no. is display and continuous the play or pause mode. After step 2, press skip down button (11) again, it will go to the previous track and continuous the play or pause mode. For MP3 disc/file 1. 2. 3. Place the MP3-CD to CD compartment. After focus search is performing, the total number of track will be shown on the LCD display (16).
PAGE 4
Remark:MP3 track format requirement:Bit rate : 32 kbps~320kbps, sampling rate : 32kHz, 44.1kHz and 48 kHz decodable - The performance of playing MP3 disc is various from the quality of recording disc and the method of recording. Furthermore, the searching lead-time for MP3-CD is longer than normal CD due to difference format.
PAGE 5
Remote control transmitter control functions Battery installation (battery not provided) The infra-red transmitter require 2 pcs “ AAA “ batteries for operation Button description Repeat/Random Press to active repeat/random function Memory Press to active program function Play/pause Press once to start playback and press again to stop playback temporarily Skip up Press to select previous / next track or press & hold to perform fast forward/backward function /down Stop Press to terminate playback