Instructions

SCD2120 / English Instruction Manual

Repeat Mode

Repeat 1: Press the REP button once, the repeat LED indicator will light and flash continuously.

This single track will be repeated.

Repeat All: Press the REP button twice, the repeat LED indicator will stay lighted. The whole disc

will be played continuously.

To Cancel Repeat Function: Press the REP button until the lighted repeat LED indicator turned

off.

CD resume function

RESUME – continuing from where you have stopped

1. Set the FUNCTION switch to CD position and set the RESUME switch to ON position

2. To start playing the CD, press the button.

3. Press STOP in once whenever you want to stop playback.

4. Press to resume playback.

5. Playback continues from where you have stopped.

To deactivate RESUME, set the RESUME to OFF position.

Note:

The RESUME function is still activated when the FUNCTION switch is set off.

Opening the CD lip during playback, RESUME function is also activated.

Important Note

Automatic standby switching

To comply with the ERP2 directive, the unit automatically switches to standby after approximately

10 minutes without a signal. To switch the unit on again, press the button on the unit.

If the button is pressed continuously for 5 seconds, the unit switches to standby mode. To

switch the unit on again, press the button on the unit.

TECHNICAL SPECIFICATION

Power supply

: 230V~50/60Hz

Battery supply

: DC6V 4x 1.5V “C” size / UM-2

FM range

: 87.5 – 108MHz

Technische Änderungen und Druckfehler vorbehalten

Vervielfältigung nur mit ausdrücklicher Genehmigung der Woerlein GmbH