DEUTSCH ENGLISH FRANÇAIS NEDERLANDS ESPAÑOL PORTUGUÊS SCD5701
WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SAFETY INSTRUCTIONS 1. READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. 3. HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4. FOLLOW INSTRUCTIONS - All operating instructions should be followed. 5.
POWER SOURCES to AC IN to a wall outlet Insert 6 x “C” size batteries into the battery compartment AC POWER You can power your portable system by plugging the detachable AC power cord into the AC inlet at the back of the unit and into a wall AC power outlet. Check that the rated voltage of your appliance matches your local voltage. Make sure that the AC power cord is fully inserted into the appliance. BATTERY POWER Insert 6 x “C” size batteries into the battery compartment.
LOCATION OF CONTROL FM ANTENNA TUNING CONTROL CD DOOR FUNCTION SELECTOR BAND SELECTOR VOLUME CONTROL OPEN / CLOSE DIAL POINTER TAPE BUTTONS - PAUSE, STOP / EJECT, FAST FORWARD, REWIND, PLAY LED DISPLAY POWER INDICATOR FM STEREO INDICATOR BACK PLAY / PAUSE NEXT STOP PROGRAM REPEAT CASSETTE DOOR E-4
RADIO OPERATION GENERAL OPERATION 1. 2. 3. 4. Set the “FUNCTION” selector to “RADIO” mode. Select desired band by using the “BAND” selector. Adjust radio frequency to your desired station by using the “TUNING” control. Adjust the “VOLUME” control to the desired level. FM / FM-STEREO RECEPTION - Set the “BAND” selector to FM mode for MONO reception. - Set the “BAND” selector to FM ST. mode for FM STEREO reception. The Stereo indicator light up to show FM ST. mode.
TAPE OPERATION GENERAL OPERATION PAUSE Press to stop playing tape operation temporarily. Press again to resume tape operation. STOP / EJECT Press to stop tape operations. Press again to open the cassette door after the tape spools stop turning. FAST FORWARD REWIND PLAY & Press to start rapid tape winding either forward or reverse direction. Press to start playing tape. PLAYBACK 1. 2. 3. 4. 5. 6. 7. Set the “FUNCTION” selector to “TAPE” mode.
CD OPERATION GENERAL OPERATION PLAY / PAUSE Press to start playing CD disc. Press again to stop playing CD operation temporarily. Press again to resume playback. NEXT BACK Press to go to the next track or back to the previous track. Press and hold while playing until you find the point of the sound. & STOP Press to stop all CD operation. PLAYBACK 1. 2. 3. 4. 5. 6. 7. 8. Set the “FUNCTION” selector to “CD” mode. Open the CD door and place a CD disc with the label up in the CD compartment.
CD OPERATION PROGRAM Up to 20 tracks can be programmed for disc play in any order. Be sure to press the “STOP” button before use. 1. Press the “PROGRAM” button, the display will show “01” and flash. 2. Select desired track by using the “NEXT” or “BACK” button. 3. Press the “PROGRAM” button again to confirm desired track into the program memory. 4. Repeat step 2 and 3 to enter additional tracks into the program memory. 5. When all the desired tracks have been programmed.